Cat C32 Marine Propulsion Engine High Performance Applications
THE RUNDOWN
Key Features & Benefits
- Electronically Governed and Controlled (ADEM IV ECM)
- Gear-drive Jacket Water Pump and Sea Water Pump for Enhanced Reliability
- MCS Certifications Available
- Titanium Plate Heat Exchanger
- LH and RH Service side options available
Ratings
| Power Range | 1600-1900 bhp (1193-1417 bkW) |
Engine
| Speed Range | 2300 rpm |
| Emissions | IMO II, U.S. EPA Tier 3 Recreational, RCD, China Stage II |
| Aspiration | Twin Turbocharged-aftercooled |
| Bore | 5.71in |
| Stroke | 6.38in |
| Displacement | 1959in³ |
| Rotation from Flywheel End | Counterclockwise |
| Configuration | Vee 12, 4-Stroke Cycle diesel |
Dimensions & Weights
| Length | 82.9in |
| Width | 58.3in |
| Height | 56.9in |
| Dry Weight | 6780lb |
Standard Equipment
Air Inlet System
- Air Cleaner / Fumes Disposal
Cooling System
- Sea Water Aftercooler
- Titanium Plate Heat Exchanger with Expansion Tank
- Gear-driven Jacket Water and Sea Water pumps
Exhaust System
- Water-cooled Exhaust Manifolds and Turbochargers
Fuel System
- MEUI Fuel System
- Fuel Priming and Transfer Pump
- Simplex Fuel Filters
STANDARD EQUIPMENT
- Engine and Transmission Monitoring
- Fuel Priming and Transfer Pump
Lube System
- 250-hr Oil Pan (Shallow Sump)
- Simplex Oil Filters
- Gear Driven Oil pump
General
- RH or LH Service Side Options
Control system
- ADEM IV Electronic Control Module
- Electronic Diagnostics and Fault Logging
- Engine and Transmission Monitoring
- Programmable Low Idle
- 70-Pin Customer Connector
- Throttle Inputs
Flywheel Housing
- Flywheel Housing SAE 0
Optional Equipment
Cooling System
- 120 V or 240 V Jacket Water Heater
Power Take Offs
- SAE A or B PTO (LH or RH rear)
Charging System
- 75 A or 105 A Alternator
- Battery Sets
Protection
- Spray Shielding
Starting System
- Electric Starting motor
Mounting System
- Isolator Mounts
Fuel System
- Primary Fuel / Water Separator
Exhaust System
- Muffler
- Felixible Fitting