CG170-12

CG170-12 Gas Generator Set

THE RUNDOWN

High Efficiency, Lower Operating Costs
  • Miller cycle timing with combustion chamber and spark plug improvement help on saving up to 15% fuel gas per year
  • CG170 (non-miller) is optimized for Island-Mode capability
  • Gearbox helps limit wear and tear on engine components, lowering operating costs and increasing availability
Low installation, Building and Operating Costs
  • Extended maintenance intervals up to 64,000 Oh
  • Low fuel consumption due to improved combustion chamber and pre-chamber spark-plugs
  • Flexible fields of application also with fluctuating gas qualities due to Total Electronic Management (TEM)
  • Optimized oil management
Optimized Lubrication Consumption
  • Consumes up to 1900 liter less lube oil per year than comparable models
  • Longer lubricant change and oil change intervals
Generator Set Specifications
Continuous Rating1200 ekW @1.0pf
Fuel TypeNatural Gas, Biogas, Coal Gas
Maximum Electrical Efficiency43.40%
Frequency50 or 60 Hz
RPM1500 rpm
Engine Specifications
Engine ModelCG170-12
Displacement3240in³
AspirationTA
Bore6.7in
Stroke7.7in
Generator Set Dimensions
Length235in
Width70in
Height87in
Dry Weight - Genset28659.8lb
Standard Equipment

Air Inlet

  • Turbocharger with a water-cooled bearing case for all cylinder
  • One-element single-stage air cleaner with enclosure and sevice indicator

Control Panels

  • TEM (Total Electronic Management)

Cooling

  • Electrical jacket water and aftercooler coolant pump
  • Jacket water and SCAC thermostats
  • flange connections for JW inlet and outlet

Exhaust

  • PEARL/Low resistence exhaust system
  • Closed crankcase ventilation system
  • Exhaust waste gate for the CG170-12

Fuel system

  • Electronic fuel metering valve
  • Independently controlled cylinder monitoring and ignition system
  • Pre-chamber spark plugs

Generator

  • Winding temperature detectors
  • Reactive droop
  • 3-phase sensing and KVAR/PF control
  • Anti-condensation space heater
  • closed-coupled generator result in no torque transmission to the base frame
  • Busbar connections
  • grid code generator

Starting/Charging

  • 24V starting motors
  • Battery disconnect switch

General

  • Crankshaft vibration damper and guard
Optional Equipment

Cooling

  • CHP skid

Grid Code Compliance

  • 50Hz: Germany, Belgium, Great Britain, Italy, Poland, and Netherlands