CG132B-8

CG132B-8 Gas Generator Set

THE RUNDOWN

High Efficiency, Lower Operating Costs
  • Highest efficiency in its output class
  • Up to 42.5% improved electrical efficiency
  • Reduced vibration and stress on components
Low installation, Building and Operating Costs
  • Compact design with integrated fuel tanks for daily refilling
  • Lower setup costs than comparable engines
  • Reduced investment costs through expanses product scope and TPEM digital control system
  • Long maintenance intervals (up to 80,000 hours)
  • Optimized oil management
Optimized Lubrication Consumption
  • Consumes less than 0.1g/kW of oil
  • Up to 66% lower lubricant consumption than comparable models
  • Longer lubricant change (up to 4,000 hours) and oil change intervals
Generator Set Specifications
Continuous Rating400 ekW @1.0pf
Fuel TypeNatural Gas, Biogas, Coal Gas, Hydrogen Blend (up to 25%)
Maximum Electrical Efficiency43.1% / 42.1%
Frequency50 / 60 Hz
RPM1500 or 1800 rpm
Engine Specifications
Engine ModelCG132-8
Displacement1067.9in³
AspirationTA
Bore5.2in
Stroke6.3in
Generator Set Dimensions
Length122in
Width70in
Height85in
Dry Weight - Genset12,610lb
Standard Equipment

Air Inlet

  • One-element single-stage air cleaner with enclosure and sevice indicator
  • Turbocharger with a water-cooled bearing case for all cylinder

Control Panels

  • TPEM (Total Plant & Energy Management System)

Cooling

  • flange connections for JW inlet and outlet
  • Electrical jacket water and aftercooler coolant pump
  • Jacket water and SCAC thermostats
  • ANSI/DN customer flange connections for JW inlet and outlet

Exhaust

  • Exhaust waste gate for the CG132B-16
  • Closed crankcase ventilation system
  • PEARL/Low resistence exhaust system

Fuel system

  • Independently controlled cylinder monitoring and ignition system
  • Electronic fuel metering valve
  • Pre-chamber spark plugs

Generator

  • Anti-condensation space heater
  • Reactive droop
  • closed-coupled generator result in no torque transmission to the base frame
  • Winding temperature detectors
  • Busbar connections
  • 3-phase sensing and KVAR/PF control
  • grid code generator

Starting/Charging

  • 24V starting motors
  • Battery disconnect switch

General

  • Crankshaft vibration damper and guard
Optional Equipment

Cooling

  • CHP skid

Grid Code Compliance

  • 50Hz: Germany, Belgium, Great Britain, Italy, Poland, and Netherlands