772 (07) Off-Highway Truck
THE RUNDOWN
ACHIEVE GREATER PRODUCTIVITY
- Haul your materials faster with an accelerated travel speed.
- Put more power to the ground with increased torque.
- Enjoy greater productivity while using a more responsive Traction
Control System (TCS). - Reduce tire wear with maximum by engaging TCS early in the slip.
- Strong, predictable performance helps operators achieve the lowest cost per ton.
BOOST FUEL EFFICIENCY
- Up to 10% less fuel consumption.
- Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power andtorque the engine is producing.
- Automatically optimize fuel consumption with the feature—Adaptive Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
- Gain improvements in fuel efficiency with auto neutral idle.
- Haul your 773 truck at a more fuel-efficient engine speed and gear selection with speed limiting.
- Conserve fuel with integrated Engine Idle Shutdown by the engine automatically initiating when the truck is in park and idle for a preset amount of time.
DESIGNED FOR SAFETY
- Improvements in accessibility with safe, ground-level access tofuel fill and daily maintenance points.
- Ensure three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
- Superior brake performance meets the latest brake standards—
ISO 3450:2011. - The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
- Sturdy 4-point mounted cabin meets rollover protective structure/
falling objects protective structure (ROPS/FOPS) standard. - 4-point seat belt provides enhanced safety to the operator.
- Seat belt indicator implements both visual and audible alerts to the
operator when seat belt is not fastened. - Lockout features help the service technician to perform
maintenance work on the machine with safe mode. - Secondary steering activates automatically in case of primary
system failure. - Overload speed limiter works with truck payload system to reduce
machine speed automatically when the truck is overloaded.
WORK IN COMFORT
- Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
- The new operator seat placement provides easier operation and comfort to the operator.
- Improvements in enlarged views of the work area and its surroundings.
- Access connectivity and decrease clutter with more storage areas in the newly designed cab.
- Automatic cab temperature controls.
- Cat next-generation deluxe seat for better operator comfort.
TECHNOLOGY THAT GETS WORK DONE
- Integrated systems give you the ability to make timely, fact-based
decisions to maximize efficiency, improve productivity, and lower
costs. - Gain valuable insight into how your machine is performing by
continuously monitoring and collecting vital machine dta via the advisor display with the software Bital Information Management System (VIMS™). Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent. - Truck Production Management System (TPMS) provides accurate weighing of the materials, stores 2,400 payload cycles, and reportson, haul cycle times, and distances with date and time stamps.
- External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
- Product Link™ system connects to each machine wirelessly,
allowing you to monitor location, hours, fuel use, productivity, idle
time, and diagnostic codes. - VisionLink®
wirelessly connects you to your equipment, giving
you access to essential information you need to know to run your business. - The Cat 773 is MineStar™ ready and includes Cat Product Link
Elite and VIMS to help optimize equipment management, remote
monitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic
failure. - Tons kilometers per hour/tons miles per hour (TKPH/TMPH) tire
management system works with TPMS for improved tire life.
REDUCED MAINTENANCE COST AND OTHER COSTS
REDUCED MAINENANCE COST AND OTHER COSTS
- Grouped service points.
- Control particulate matter with two engine-mounted diesel
- oxidation catalyst canisters. (Tier 4)
- NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and
- NOx production. (Tier 4)
- Parts commonality with other Cat equipment.
- Resolve problems before failure occurs with VIMS notifications.
- Torque converter stall (autostall) enables quick operating temperatures for best performance life.
- All LED lights provide longer life, brighter light, consume less power, and are more resistant to vibration or water damage.
APPLICATION VERSTILITY
APPLICATION VERSATILITY
- Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
- For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
- The flat floor body is perfect for metering material, especially when
feeding the crusher. - Optimize your body life by selecting a liner package best suited
for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications.
Engine
| Engine Model | Cat® C18 |
| Rated Engine Speed | 1700.0r/min |
| Gross Power - SAE J1995:2014 | 605.0hp |
| Net Power - SAE J1349:2011 | 550.0hp |
| Net Power - ISO 9249 | 550.0hp |
| Number of Cylinders | 6 |
| Bore | 5.7in |
| Stroke | 7.2in |
| Displacement | 1105.0in³ |
| Net Torque - SAE J1349 | 2221.0ft-lb |
| Engine Power - ISO 14396 | 598.0hp |
Weights - Approximate
| Target Gross Machine Operating Weight | 181000.0lb |
| Chassis Weight | 59223.0lb |
| Body Weight | 17306.0lb |
| Target Gross Machine Weight | 181000.0lb |
Operating Specifications
| Nominal Payload Class (100%) | 51.6ton (US) |
| Top Speed - Loaded | 49.2mile/h |
| Maximum Payload Class (110%) | 56.7ton (US) |
| Body Capacity - SAE 2:1 | 40.8yd³ |
| Target Payload Capacity | 51.6ton (US) |
| Not to Exceed Payload (120%) | 61.9ton (US) |
| Body Capacity (SAE 2:1)** | 40.8yd³ |
Transmission
| Forward - 1 | 8.0mile/h |
| Forward - 2 | 10.9mile/h |
| Forward - 3 | 14.8mile/h |
| Forward - 4 | 19.8mile/h |
| Forward - 5 | 26.9mile/h |
| Forward - 6 | 36.2mile/h |
| Forward - 7 | 49.2mile/h |
| Reverse | 10.4mile/h |
Final Drives
| Differential Ratio | 2.74:1 |
| Planetary Ratio | 4.80:1 |
| Total Reduction Ratio | 13.14:1 |
Brakes
| Brake Surface - Front | 216.0in² |
| Brake Surface - Rear | 7794.0in² |
| Brake Standards | ISO 3450:2011 |
Body Hoists
| Pump Flow - High Idle | 112.0gal/min |
| Relief Valve Setting - Raise | 2750.0psi |
| Relief Valve Setting - Lower | 500.0psi |
| Body Raise Time - High Idle | 8.0s |
| Body Lower Time - Float | 10.0s |
| Body Power Down - High Idle | 10.0s |
Capacity - Dual Slope - 100% Fill Factor
| Heaped 2:1 (SAE) | 40.8yd³ |
| Struck | 31.3yd³ |
Capacity - Flat Floor - 100% Fill Factor
| Struck | 31.3yd³ |
| Heaped 2:1 (SAE) | 40.9yd³ |
Weight Distributions - Approximate
| Front Axle - Empty | 51.4% |
| Front Axle - Loaded | 34.2% |
| Rear Axle - Empty | 48.6% |
| Rear Axle - Loaded | 65.8% |
Suspension
| Rear axle - Oscillation | 8.9° |
| Empty Loaded Cylinder Stroke Front | 9.2in |
| Empty Loaded Cylinder Stroke Rear | 5.8in |
Service Refill Capacities
| Fuel Tank | 140.0gal (US) |
| Cooling System | 33.0gal (US) |
| Differential - Final Drives | 47.0gal (US) |
| Steering Tank | 14.5gal (US) |
| Steering System - Including Tank | 23.0gal (US) |
| Torque Converter - Transmission System | 17.0gal (US) |
| Brake Hoist System | 60.0gal (US) |
| DEF Tank | 6.0gal (US) |
| Crankcase | 17.0gal (US) |
| Brake/Hoist Hydraulic Tank | 38.0gal (US) |
Tires
| Standard Tire | 21.00R33 (E4) |
ROPS
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. |
| ROPS Standards | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
Sound
| Sound Standards (3) | Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. |
| Sound Standards (2) | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). |
| Sound Standards (1) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
Steering
| Turning Diameter - Front | 57.7ft |
| Steering Standards | ISO 5010:2007 |
| Steer Angle | 40.5° |
| Turning Circle - Clearance Diameter | 66.6ft |
Dimensions
| Height - Top of ROPS | 12.8ft |
| Inside Body Depth - Maximum | 5.7ft |
| Overall Body Length | 26.8ft |
| Inside Body Length | 19.0ft |
| Overall Length | 28.9ft |
| Wheel Base | 13.0ft |
| Rear Axle - Tail | 9.5ft |
| Ground Clearance | 1.6ft |
| Dump Clearance | 1.5ft |
| Loading Height - Empty | 11.6ft |
| Overall Height - Body Raised | 27.1ft |
| Operating Width | 15.7ft |
| Centerline Front Tire Width | 10.4ft |
| Engine Guard Clearance | 2.0ft |
| Outside Body Width | 12.9ft |
| Inside Body Width | 11.9ft |
| Front Canopy Height | 13.7ft |
| Rear Axle - Clearance | 1.9ft |
| Centerline of Rear Dual Tire Width | 8.7ft |
| Overall Tire Width | 12.9ft |
Standard Equipment
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
ELECTRICAL
- Alarm, backup
- Alternator, 115 ampere
- Auxiliary jump start receptacle
- Batteries, maintenance-free, 12V (2), 190 amp-hour
- Electrical system, 24V
- Lighting system: - Backup light (halogen) - Directional signals/hazard warning (front and rear LED) - Headlights, (halogen) with dimmer - Operator access courtesy lights (Developing Market Only)
PRODUCT LINK™ COMMUNICATIONS
- Product Link Ready
GUARDS
- Driveline
- Engine crankcase
OPERATOR ENVIRONMENT
- Air conditioning
- Ashtray and cigarette lighter
- Coat hook
- Cup holders (4)
- Diagnostic connection port, 24V
- Entertainment Radio Ready: - 5 amp converter - Speakers - Antenna - Wiring harness
- Gauges/indicators: - Air cleaner service indicator - electronic - Brake oil temperature gauge - Coolant temperature gauge - Hour meter - Tachometer - Engine overspeed indicator - Fuel level - Speedometer with odometer - Transmission gear indicator
- Heater/defroster (11 070 kCal/43,930 BTU)
- Hoist lever
- Horn, electric
- Light - dome
- Light - courtesy
- Messenger, display unit
- Mirrors
- Power port, 12V
- ROPS cab, insulated/sound suppressed
- Seat, Cat Comfort Series III: - full air suspension - four point harness
- Steering wheel, padded, tilt and telescopic
- Storage compartment
- Sun visor, tinted glass
- Throttle lock
- Windshield wiper (intermittent) and washer
POWER TRAIN
- Air-To-Air Aftercooler (ATAAC)
- Air cleaner with precleaner (1)
- Automatic cold mode idle control
- Electric start
- Turbocharger
- Braking system, hydraulic actuated: - Automatic Retarder Control (ARC) (utilizes rear oil-cooled, multiple disc brakes) - Brake release motor (towing) - Caliper-disc (front) - Oil-cooled, multiple disc (rear) - Parking - Secondary - Service
- Transmission: - 7 speed automatic powershift - Body up shift inhibitor - Controlled throttle shifting - Directional shift management - Downshift inhibitor - Neutral start switch - Neutral coast inhibitor - Reverse shift inhibitor - Reverse neutralizer during dumping - Programmable top gear selection
SUSPENSION SYSTEMS
- Suspension, front and rear
OTHER STANDARD EQUIPMENT
- Body safety pin (secures body in up position)
- Body down indicator
- CD ROM parts book
- Fan, hydraulic demand
- Fuel tank (530 L/140 gal)
- Guard, engine compartment
- Guard, mud
- Ground level battery disconnect
- Ground level engine shutdown
- Ground level grease fittings
- Reservoirs (separate): - Brake/converter/hoist - Steering - Transmission/torque converter
- Rims 15 × 33
- Rock ejectors
- Service platform, left and right side
- Supplemental steering (automatic)
- Tie down eyes
- Tow hooks (front)/Tow pin (rear)
- Vandalism protection locks
ANTIFREEZE
- Extended Life Coolant to -35° C (-30° F)
