307.5 Mini Hydraulic Excavator
THE RUNDOWN
ALL DAY COMFORT
- A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with Cat Stick Steer. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A MINI DESIGN
- Increased lifting, swinging, travel and multi-functioning performance helps you get the job done more efficiently, and blade float allows for easy grading.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.
UNMATCHED DEALER SUPPORT
- Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.
SUSTAINABILITY
- The Cat® C2.4 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
- Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).
Engine
| Net Power | 54.8hp |
| Displacement | 148in³ |
| Gross Power - SAE J1995:2014 | 57.9hp |
| Bore | 3.4in |
| Stroke | 4in |
| Rated Net Power - 2,400 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 | 54.8hp |
| Engine Model | Cat C2.4 Turbo |
Weights
| Operating Weight | 17905lb |
| Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. |
| Maximum Operating Weight with Cab** | 17905lb |
| Minimum Operating Weight with Cab* | 16549lb |
| Note (1) | *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. |
Dimensions - Long Stick
| Dig Depth | 182.8in |
| Cab Height | 100in |
| Maximum Blade Height | 14.6in |
| Track Belt/Shoe Width | 17.7in |
| Maximum Dump Clearance | 225.1in |
| O/A Undercarriage Length | 108.7in |
| O/A Track Width | 86.6in |
| Vertical Wall | 161.9in |
| Width over Upper House | 88.6in |
| Boom In Reach | 88.6in |
| Stick Length | 86.9in |
| Tail Swing with Counterweight | 76in |
| Maximum Reach | 267.9in |
| Ground Clearance | 14.6in |
| Swing Bearing - Height | 29.7in |
| Tail Swing without Counterweight | 70.9in |
| Maximum Dig Height | 305.7in |
| Maximum Blade Depth | 16in |
| Maximum Reach - Ground Level | 262.6in |
| Height - Boom Transport - No Tools | 100.4in |
| Overall Shipping Length - without Counterweight | 240.9in |
| Overall Shipping Length - with Counterweight | 246.1in |
| Note (1) | Boom Height when stick is pinned in transport position with no attachments. |
| Height - Boom Working - With Tools | 124in |
| Note (2) | Boom Height when stick is pinned in working position with attachments. |
Weight Increase from Minimum Configuration
| Long Stick | 181lb |
| Counterweight | 552lb |
| Steel Tracks with Pads | 628lb |
Travel System
| Maximum Traction Force - Low Speed | 14035lb |
| Maximum Traction Force - High Speed | 5856lb |
| Travel Speed - High | 3.1mile/h |
| Ground Pressure - Maximum Weight | 5.5psi |
| Travel Speed - Low | 1.9mile/h |
| Gradeability - Maximum | 30 degrees |
| Ground Pressure - Minimum Weight | 5.1psi |
Service Refill Capacities
| Cooling System | 2.6gal (US) |
| Hydraulic System | 29gal (US) |
| Hydraulic Tank | 14gal (US) |
| Fuel Tank | 38gal (US) |
| Engine Oil | 2.5gal (US) |
Hydraulic System
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Operating Pressure - Swing | 3626psi |
| Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. |
| Pump Flow at 2,400 rpm | 44gpm |
| Digging Force - Stick - Standard | 8504lb |
| Operating Pressure - Travel | 4134psi |
| Operating Pressure - Equipment | 4134psi |
| Digging Force - Stick - Long | 7579lb |
| Digging Force - Bucket | 12272lb |
| Maximum Auxiliary Circuit - Secondary - Flow at Pump | 9gpm |
| Maximum Auxiliary Circuit - Secondary - Pressure at Pump | 4134psi |
| Maximum Auxiliary Circuit - Primary - Flow at Pump | 35gpm |
| Maximum Auxiliary Circuit - Primary - Pressure at Pump | 4134psi |
Swing System
| Machine Swing Speed | 10r/min |
Blade
| Height | 17in |
| Width | 90in |
Certification - Cab
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| Top Guard | ISO 10262:1998 (Level I) |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
Sound
| Operator Sound Pressure (ISO 6396:2008) | 72dB(A) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 98dB(A) |
| Note | European Union Directive “2000/14/EC” |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains .90 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. |
Dimensions - Standard Stick
| Tail Swing with Counterweight | 76in |
| Vertical Wall | 141.6in |
| Tail Swing without Counterweight | 70.9in |
| Stick Length | 65.6in |
| Boom In Reach | 66.2in |
| Track Belt/Shoe Width | 17.7in |
| Ground Clearance | 14.6in |
| O/A Track Width | 86.6in |
| Maximum Reach - Ground Level | 242.1in |
| O/A Undercarriage Length | 108.7in |
| Width over Upper House | 88.6in |
| Maximum Reach | 247.9in |
| Swing Bearing - Height | 29.7in |
| Maximum Blade Height | 14.6in |
| Maximum Blade Depth | 16in |
| Dig Depth | 161.4in |
| Maximum Dump Clearance | 208.6in |
| Cab Height | 100in |
| Maximum Dig Height | 289.3in |
| Height - Boom Working - With Tools | 107.5in |
| Overall Shipping Length - with Counterweight | 245.3in |
| Note (2) | Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position. |
| Overall Shipping Length - without Counterweight | 240.2in |
| Height - Boom Transport - No Tools | 101.2in |
| Note (1) | Boom Height when stick is pinned in transport position with no attachments. |
Sustainability
| Recyclability | 96% |
Standard Equipment
ENGINE
- Cat C2.4 Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo,Diesel Particulate Filter (DPF)
- Automatic Engine Idle
- Automatic Engine Shutdown
- Automatic Swing Brake
- Automatic Two Speed Travel
- Fuel Water Separator with Indicator
- Radial Seal – Double Element Air Filter
- Extended Life Coolant, –37° C ( –37° F)
HYDRAULICS
- Smart Tech Electronic Pump
- Variable Displacement Piston Pump
- Load Sensing/Flow Sharing Hydraulics
- Power On Demand
- Hydraulic Temperature Monitoring
- Certified Accumulator
- HYDO™ Advanced Hydraulic Oil
OPERATOR ENVIRONMENT
- Top Guard ISO 10262 1998 Level I
- ROPS ISO 12117-2:2008
- Stick Steer Mode
- Travel Cruise Control
- Control Pattern Changer
- Adjustable Wrist Rests
- Molded Footrests
- Removable, Washable Floor Mat
- Travel Pedals and Hand Levers
- Cat Key with Passcode Option
- HVAC with Automatic Temperature Control
- Hydraulic Lockout Controls
- Integrated Lower Front Window
- Assisted Front Window Overhead Storage
- Rear Window Emergency Exit
- Cab Mirrors (vary by region)
- Fabric, High Back, Suspension Seat
- Retractable Seat Belt (75 mm/3 in)
- Coat Hook
- Cup Holder
- LED Interior Light
- Literature Holder
- Mounting Bosses for Top and Front Guards
- 12V Power Socket
- Radio – Bluetooth®, Auxiliary, Microphone, USB (charging only)
- Skylight
- Signaling/Warning Horn
- Cab and (left side) Boom Work Lights
- Utility Space for Mobile Phone
- Next Generation Color LCD Monitor (IP66) – Jog Dial Interface (cab machines only)– Fuel Level and Coolant Temperature Gauges– Maintenance and Machine Monitoring– Performance and Machine Adjustments– Numeric Security Code– Multiple Languages– Camera Ready (IP68 and IP69K)– Hour Meter with Wake Up Switch
TECHNOLOGY (availability varies by region)
- Product Link™ Basic
UNDERCARRIAGE
- Greased and Lubricated Track
- Tie Down Eyes on Track Frame
- Dozer Straight Blade
- Dozer Float
- Bolt-on, Reversible Wear Edge
BOOM, STICK AND LINKAGES
- One Piece Boom (3700 mm/145.7 in)
- Standard Stick (1665 mm/65.6 in)
- Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler for Cat Tools
- Thumb Ready (not available in all regions)
- Certified Lifting Eye (optional in some regions)
ELECTRICAL
- 12 Volt Electrical System
- 90 Ampere Alternator
- 900 CCA Maintenance Free Battery
- Lock Out/Tag Out Battery Disconnect
- Ignition Key Stop Switch
- Travel Alarm
- Rear and Side Camera
GUARDING
- ROPS ISO 12117-2:2008
- Top Guard ISO 10262:1998 (Level I)
OTHER
- Locks on External Enclosure Doors
- Lockable Fuel Cap
- Beacon Socket
- Rear Reflectors
Optional Equipment
OPERATOR ENVIRONMENT
- Air Suspension Heated Seat
- Seat Belt Reminder System
- Rain Visor
- Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option) – Jog Dial Control Interface– Touch Screen– Site Reference System– High Definition Camera Capable (IP68 and IP69K)– Numeric Security Code
TECHNOLOGY (availability varies by region)
- Ease of Use Indicate
- Ease of Use E-Fence
- Cat Grade Advanced 2D
- Cat Grade 3D
- Product Link Elite (regulations apply)
UNDERCARRIAGE
- Steel Tracks (450 mm/17.7 in wide)
- Wide Steel Tracks (600 mm/23.6 in)
- Steel Track with Rubber Pads
- Track Guides
BOOM, STICK AND LINKAGES
- Long Stick (2200 mm/86.6 in)
- Attachments including Buckets, Augers and Hammers
- Certified Lifting Eye (optional in some regions)
ELECTRICAL
- Rotating Beacon
GUARDING
- Top Guard ISO 10262:1998 (Level II)
- Front Guard (Mesh) ISO 10262:1998 (Level I)
- Front Guard (Heavy Duty) ISO 10262:1998 (Level II)
- Track Guards
OTHER
- Water Jacket Heater
- Refueling Pump
