305 CR – Tier 4 / Stage V

305 CR Mini Hydraulic Excavator

THE RUNDOWN

ALL DAY COMFORT
ALL DAY COMFORT
  • Choose either a canopy or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat to help keep you working comfortably all day long.
EASY TO OPERATE
EASY TO OPERATE
  • Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped as an upgrade option.
STICK STEER TRAVEL MODE
STICK STEER TRAVEL MODE
  • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN
BIG PERFORMANCE IN A COMPACT DESIGN
        
  • Strong lift and dig performance helps you get the job done faster. The compact radius design lets you access and work in the tightest areas. Dig-to-blade and dozer blade float allows for easy clean up. An angle blade is also an option for finished grading and easier backfilling applications.
SAFETY ON THE JOB SITE
SAFETY ON THE JOB SITE
  • Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt with optional seat belt reminder system are just a couple of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
SIMPLE SERVICE FOR LESS DOWNTIME
  • Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors.
LOWER OPERATING COSTS
LOWER OPERATING COSTS
  • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
UNMATCHED DEALER SUPPORT
UNMATCHED DEALER SUPPORT
  • Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.
Engine
Net Power45hp
Engine ModelC1.7 Turbo
Displacement101in³
EmissionsThe Cat® C1.7 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (2)Net power advertised is the power available at the flywheel when the engine is at the rated speed of 2400 rpm and the engine is installed with the factory configured fan, air intake system, exhaust system and alternator with a minimum alternator load.
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC45hp
NoteAdvertised power is tested per the specified standard in effect at the time of manufacture.
Gross Power - 2,400 rpm - SAE J1995:201448.4hp
Stroke3.9in
Bore3.3in
Weights
Operating Weight12688lb
Minimum Operating Weight with Canopy*11016lb
Note (1)*Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight.
Minimum Operating Weight with Cab*11234lb
Maximum Operating Weight with Cab**12688lb
Maximum Operating Weight with Canopy**12469lb
Note (2)**Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket.
Dimensions - Long Stick
Dig Depth144.5in
O/A Undercarriage Length101.6in
Tail Swing with Counterweight47.2in
Vertical Wall100.8in
Note*Overall Shipping Length depends on blade position during shipment.
Overall Shipping Length*210.2in
Maximum Dig Height210.8in
Stick Length63in
Track Width78in
Maximum Blade Depth23.4in
Maximum Dump Clearance151.4in
Boom Swing - Left615mm
Boom Swing - Right34.1°
Swing Bearing - Height24.4in
Boom Height - Shipping Position74.6in
Boom In Reach101.6in
Maximum Reach235.8in
Track Belt/Shoe Width15.7in
Maximum Reach - Ground Level229.7in
Maximum Blade Height15.2in
O/A Shipping Height100.4in
Tail Swing without Counterweight43.1in
Ground Clearance13.2in
Travel System
Travel Speed - High3.1mile/h
Gradeability - Maximum30 degrees
Ground Pressure - Minimum Weight4psi
Maximum Traction Force - Low Speed11353lbf
Ground Pressure - Maximum Weight4.7psi
Travel Speed - Low1.7mile/h
Maximum Traction Force - High Speed5553lbf
Dimensions - Standard Stick
Stick Length53.2in
Track Belt/Shoe Width15.7in
Boom In Reach101.2in
Vertical Wall91.9in
Tail Swing with Counterweight47.2in
Maximum Dump Clearance145.7in
O/A Shipping Height100.4in
Note*Overall Shipping Length depends on blade position during shipment.
Maximum Dig Height205.3in
Maximum Blade Height15.2in
Dig Depth134.6in
Boom Swing - Right34.1°
Maximum Reach - Ground Level220.1in
Tail Swing without Counterweight43.1in
Boom Height - Shipping Position71.7in
Maximum Blade Depth23.4in
Maximum Reach226.6in
Boom Swing - Left24.2°
Overall Shipping Length*208.9in
O/A Undercarriage Length101.6in
Swing Bearing - Height24.4in
Ground Clearance13.2in
Hydraulic System
Auxiliary Circuit - Secondary - Flow7gpm
Digging Force - Stick - Standard6362lbf
Auxiliary Circuit - Primary - Pressure3843psi
Auxiliary Circuit - Primary - Flow21gpm
Digging Force - Bucket11061lbf
Operating Pressure - Equipment3843psi
NoteFlow and pressure are not combinable. Under load, as flow rises pressure goes down.
TypeLoad Sensing Hydraulics with Variable Displacement Piston Pump
Digging Force - Stick - Long5665lbf
Auxiliary Circuit - Secondary - Pressure3843psi
Pump Flow at 2,400 rpm35gpm
Operating Pressure - Swing2901psi
Operating Pressure - Travel3843psi
Weight Increase from Minimum Configuration
Long Stick75lb
Steel Tracks with Pads827lb
Counterweight534lb
Angle Blade225lb
Sound
Operator Sound Pressure (ISO 6396:2008)76dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)97dB(A)
Note*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed. **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Swing System
Boom Swing - Right50 Degrees
Boom Swing - Left72 Degrees
Machine Swing Speed9r/min
Service Refill Capacities
Hydraulic System20gal (US)
Cooling System2.9gal (US)
Hydraulic Tank16gal (US)
Fuel Tank17gal (US)
Engine Oil1.6gal (US)
Blade
Angle Blade Height15.7in
Angle Blade - Left25 degrees
Angle Blade - Right25 degrees
Angle Blade Width78in
Straight Blade Height15.4in
Straight Blade Width78in
Certification - Cab and Canopy
Roll Over Protective Structure (ROPS)ISO 12117-2:2008
Tip Over Protective Structure (TOPS)ISO 12117:1997
Top GuardISO 10262:1998 Level I
Sustainability
Recyclability96%
Standard Equipment

ENGINE

  • Cat® C1.7 Turbo Engine (U.S. EPA Tier 4 Final)
  • Automatic Engine Idle
  • Automatic Engine Shutdown
  • Automatic Two Speed Travel
  • Fuel Water Separator
  • Power on Demand (not available in all regions)
  • Variable Displacement Piston Pump
  • Load Sensing/Flow Sharing Hydraulics

HYDRAULICS

  • Smart Tech Electronic Pump
  • Accumulator
  • Automatic Swing Brake
  • Auxiliary Hydraulic Lines
  • One and Two Way Auxiliary Flow
  • Continuous Auxiliary Flow
  • Auxiliary Line Quick Disconnects

GUARDING

  • ROPS ISO 12117-2:2008
  • Top Guard ISO 10262:1998 (Level I)

OTHER

  • Eco Drain

OPERATOR ENVIRONMENT

  • LED Front and Rear Lights
  • LED Boom Light
  • Canopy or Cab
  • Top Guard ISO 10262:1998 Level I
  • ROPS – ISO 12117-2:2008
  • TOPS – ISO 12117:1997
  • Stick Steer Mode
  • Travel Cruise Control
  • Control Pattern Changer (optional in some regions)
  • Adjustable Wrist Rests
  • Washable Floor Mat
  • Travel Pedals and Hand Levers
  • Machine Security
  • Machine Security – Standard Key with Pass Code
  • Fabric Suspension Seat (Cab only)
  • Vinyl Suspension Seat (Canopy only)
  • Hydraulic Lockout – All Controls
  • Retractable High Visibility Seat Belt (75 mm/3 in)
  • Coat Hook
  • Cup Holder
  • Storage Pocket
  • Skylight
  • Mounting Bosses for Front
  • Signaling/Warning Horn
  • Interior Light (Cab only)
  • Boom Light, Halogen (not available in all regions)
  • Utility Space for Mobile Phone
  • Next Generation Color LCD Monitor (IP66)– Fuel Level and Coolant Temperature Gauges– Maintenance and Machine Monitoring– Performance and Machine Adjustments– Numeric Security Code– Multiple Languages– Hour Meter with Wake Up Switch– Jog Dial (cab only)

UNDERCARRIAGE

  • Rubber Belt (400 mm/15.7 in)
  • Dozer Straight Blade
  • Dozer Blade Float
  • Tie Downs on Track Frame

BOOM, STICK AND LINKAGES

  • One Piece Boom (2716 mm/106.9 in)
  • Standard Stick (1351 mm/53.2 in)
  • Front Shovel Capable – Pin-On
  • Thumb Ready
  • Certified Lifting Eye

ELECTRICAL

  • 12 Volt Battery
  • Software (machine and monitor)
  • Maintenance Free Battery
  • Lock Out/Tag Out Battery Disconnect
  • 12 Volt Power Socket
  • Travel Alarm (optional in some regions)
Optional Equipment

UNDERCARRIAGE

  • Steel Track (400 mm/15.7 in)
  • Steel Track with Rubber Pads
  • Angle Blade

BOOM, STICK AND LINKAGES

  • Long Stick (1601 mm/63.0 in)
  • Front Shovel Capable – Dual Lock Manual Coupler
  • Front Shovel Capable – Hydraulic Coupler
  • Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
  • 2nd Auxiliary Hydraulic Lines
  • Bucket Divert Lines
  • Boom Lowering Check Valve
  • Stick Lowering Check Valve
  • Hydraulic Quick Coupler Lines

ELECTRICAL

  • Product Link™ PL243 (regulations apply)
  • Product Link PLE643 (regulations apply)

OTHER

  • Bio Oil Capable
  • Water Jacket Heater
  • Counterweight (242 kg/534 lb)

OPERATOR ENVIRONMENT

  • Cab with Air Conditioning
  • Cab with Heater
  • No Travel Pedals and Hand Levers (optional in some regions)
  • Machine Security – Push to Start with Key Fob/Pass Code
  • Mirrors, Left, Right and Rear
  • Camera
  • Radio – Bluetooth®, Auxiliary, Microphone, USB (charging only) (Cab only)
  • Next Generation Advanced Monitor– Touch Screen– Site Reference System– High Definition Camera Capable (IP68 and IP69K)– Numeric Security Code
  • Seat Belt Reminder System
  • Cat Grade with Advanced 2D
  • Cat Grade with 3D

GUARDING

  • Top Guard ISO 10262:1998 (Level II)
  • Front Guard (Mesh) ISO 10262:1998 (Level I)
  • Front Guard (Heavy Duty) ISO 10262:1998 (Level II)

1300 mm (51 in) Skid Steer Coupler Class II Pallet Fork Carriage

1300 mm (51 in) Skid Steer Coupler Class II Pallet Fork Carriage
Height21.7 in
Width51 in
Overall Width51.7 in

HMF110 Flail Mower

HMF110 Flail Mower
Working Width39.4 in
Required HydraulicsStandard Flow
Overall Width46.6 in

406 mm (16 in), 76 L (2.7 ft3) Pin On Heavy Duty Bucket With 45 mm (1.8 in) Pin Bores

406 mm (16 in), 76 L (2.7 ft3) Pin On Heavy Duty Bucket With 45 mm (1.8 in) Pin Bores
Width16 in
Capacity2.7 yd³
Weight174.2 lb