302 CR

302 CR Mini Hydraulic Excavator

THE RUNDOWN

ALL DAY COMFORT
ALL DAY COMFORT
  • Choose either a canopy or a sealed and pressurized cab equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.
EASY TO OPERATE
EASY TO OPERATE
  • Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
STICK STEER TRAVEL MODE
STICK STEER TRAVEL MODE
  • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN
BIG PERFORMANCE IN A COMPACT DESIGN
  • Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.
SAFETY ON THE JOB SITE
SAFETY ON THE JOB SITE
  • Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
SIMPLE SERVICE FOR LESS DOWNTIME
  • Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab lets you reach additional service areas when needed.
LOWER OPERATING COSTS
LOWER OPERATING COSTS
  • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
SUSTAINABILITY
SUSTAINABILITY
  • The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
  • The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)
Engine
Net Power21hp
Engine ModelC1.1
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC21hp
Gross Power - SAE J1995:201421.6hp
Bore3in
Stroke3.2in
Displacement69in³
EmissionsMeets U.S. EPA Tier 4 Final and EU Stage V emission standards.
NoteNet power is tested per ISO 9249:2007 and 80/1269/EEC.
Note (1)Engine power is tested per ISO 14396:2002.
Note (2)Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
Weights
Operating Weight4987lb
Minimum Operating Weight with Canopy*4229lb
Maximum Operating Weight with Canopy**4588lb
Minimum Operating Weight with Cab*4535lb
Maximum Operating Weight with Cab**4987lb
EU: CE Plate Weight with Canopy***4508lb
EU: CE Plate Weight with Cab***4718lb
Note (1)*Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.
Note (2)**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
Note (3)***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Weight Increase from Minimum Configuration
Long Stick18lb
Steel Tracks132lb
Expandable Undercarriage212lb
Travel System
Travel Speed - High2.7mile/h
Travel Speed - Low1.8mile/h
Maximum Traction Force - High Speed2967.5lbf
Maximum Traction Force - Low Speed4496.2lbf
Ground Pressure - Minimum Weight3.4psi
Ground Pressure - Maximum Weight3.9psi
Gradeability - Maximum30 degrees
Service Refill Capacities
Cooling System1gal (US)
Engine Oil1.2gal (US)
Fuel Tank6.9gal (US)
Hydraulic Tank4.8gal (US)
Hydraulic System6.9gal (US)
Hydraulic System
TypeLoad Sensing Hydraulics with Variable Displacement Piston Pump
Pump Flow at 2,400 rpm17.4gpm
Operating Pressure - Equipment3553.4psi
Operating Pressure - Travel3553.4psi
Operating Pressure - Swing2132.1psi
Auxiliary Circuit - Primary - Flow8.7gpm
Auxiliary Circuit - Primary - Pressure3553.4psi
Auxiliary Circuit - Secondary - Flow3.7gpm
Auxiliary Circuit - Secondary - Pressure3553.4psi
Digging Force - Stick - Standard2540.3lbf
Digging Force - Stick - Long2203.1lbf
Digging Force - Bucket4406.3lbf
Swing System
Machine Swing Speed9.8r/min
Blade
Width*42.9in
Height8.9in
Note*Expanded – 1400 mm (55 in)
Certification - Cab and Canopy
Roll Over Protective Structure (ROPS)ISO 12117-2:2008
Tip Over Protective Structure (TOPS)ISO 12117:1997
Top GuardISO 10262:1998 (Level I)
Dimensions - Standard Stick
Dig Depth93.3in
Vertical Wall72.8in
Maximum Reach - Ground Level159.1in
Maximum Reach161.8in
Maximum Dig Height139.8in
Maximum Dump Clearance100.8in
Boom In Reach65.4in
Tail Swing29.5in
Maximum Blade Height11.2in
Maximum Blade Depth11.6in
Boom Height - Shipping Position42.1in
O/A Shipping Height90.6in
Swing Bearing - Height17.4in
O/A Undercarriage Length72.8in
Overall Shipping Length*153.5in
Boom Swing - Right50°
Boom Swing - Left65°
Track Belt/Shoe Width9.8in
Track Width - Retracted42.9in
Track Width - Expanded55.12in
Minimum Ground Clearance Below Undercarriage5.9in
Stick Length37.8in
Note*Overall Shipping Length depends on blade position during shipment.
Dimensions - Long Stick
Dig Depth101.2in
Vertical Wall76.4in
Maximum Reach - Ground Level165.7in
Maximum Reach168.1in
Maximum Dig Height142.5in
Maximum Dump Clearance103.9in
Boom In Reach65.4in
Tail Swing29.5in
Maximum Blade Height11.2in
Maximum Blade Depth11.6in
Boom Height - Shipping Position40.2in
O/A Shipping Height90.6in
Swing Bearing - Height17.4in
O/A Undercarriage Length72.8in
Boom Swing - Right50°
Overall Shipping Length*152.8in
Boom Swing - Left65°
Track Belt/Shoe Width9.8in
Track Width - Retracted42.9in
Track Width - Expanded55.12in
Minimum Ground Clearance Below Undercarriage5.9in
Stick Length45.7in
Note*Overall Shipping Length depends on blade position during shipment.
Air Conditioning System
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1.65 lb), 0.90 kg (1.98 lb) or 1.0 kg (2.20 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons) for R134a and 0.001 tonnes (0.001 tons) for R1234yf (Europe).
Sound
Operator Sound Pressure (ISO 6396:2008)72dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)99dB(A)
NoteEuropean Union Directive “2000/14/EC”
Sustainability
Recyclability95%
Standard Equipment

ENGINE

  • Cat C1.1 Engine (U.S. EPA Tier 4 Final/EU Stage V)
  • Cat C1.1 Engine (U.S. EPA Tier 4 Final/EU Stage V)
  • Automatic Engine Idle
  • Automatic Engine Idle
  • Automatic Engine Shutdown
  • Automatic Engine Shutdown
  • Automatic Two Speed Travel
  • Automatic Two Speed Travel
  • Fuel Water Separator
  • Fuel Water Separator
  • Power on Demand (not available in all regions)
  • Power on Demand (not available in all regions)
  • Variable Displacement Piston Pump
  • Variable Displacement Piston Pump
  • Load Sensing/Flow Sharing Hydraulics
  • Load Sensing/Flow Sharing Hydraulics

HYDRAULICS

  • Smart Tech Electronic Pump
  • Accumulator
  • Smart Tech Electronic Pump
  • Automatic Swing Brake
  • Accumulator
  • Auxiliary Line Quick Disconnects
  • Automatic Swing Brake
  • One and Two Way Auxiliary Flow
  • Auxiliary Hydraulic Lines
  • Continuous Auxiliary Flow
  • Auxiliary Hydraulic Lines
  • One and Two Way Auxiliary Flow
  • Continuous Auxiliary Flow
  • Auxiliary Line Quick Disconnects

OPERATOR ENVIRONMENT

  • Tilt-up Canopy or Tilt-Up Cab
  • Machine 2-Point Lifting
  • Travel Cruise Control
  • Tilt-up Canopy or Tilt-Up Cab
  • Control Pattern Changer (optional in some regions)
  • Top Guard ISO 10262:1998 Level I
  • Adjustable Wrist Rests
  • ROPS – ISO 12117-2:2008
  • Washable Floor Mat
  • TOPS – ISO 12117:1997
  • Travel Pedals and Hand Levers
  • Machine 2-Point Lifting
  • Stick Steer Mode
  • Machine Security
  • Stick Steer Mode
  • Standard Key with Pass Code
  • Travel Cruise Control
  • Fabric Suspension Seat (Cab only)
  • Control Pattern Changer (optional in some regions)
  • Adjustable Wrist Rests
  • Hydraulic Lockout – All Controls
  • Washable Floor Mat
  • Retractable High Visibility Seat Belt (75 mm/3 in)
  • Travel Pedals and Hand Levers
  • Coat Hook
  • Machine Security
  • Cup Holder
  • Machine Security – Standard Key with Pass Code
  • Storage Pocket
  • Fabric Suspension Seat (Cab only)
  • Skylight
  • Vinyl Suspension Seat (Canopy only)
  • Mounting Bosses for Front
  • Hydraulic Lockout – All Controls
  • Signaling/Warning Horn
  • Retractable High Visibility Seat Belt (75 mm/3 in)
  • Interior Light (Cab only)
  • Coat Hook
  • Boom Light, Halogen
  • Cup Holder
  • Utility Space for Mobile Phone
  • Storage Pocket
  • Next Generation Color LCD Monitor (IP66)– Fuel Level and Coolant Temperature Gauges– Maintenance and Machine Monitoring– Performance and Machine Adjustments– Numeric Security Code– Multiple Languages– Hour Meter with Wake Up Switch
  • Skylight
  • Mounting Bosses for Front
  • Signaling/Warning Horn
  • Interior Light (Cab only)
  • Boom Light, Halogen
  • Utility Space for Mobile Phone
  • Next Generation Color LCD Monitor (IP66)– Fuel Level and Coolant Temperature Gauges– Maintenance and Machine Monitoring– Performance and Machine Adjustments– Numeric Security Code– Multiple Languages– Hour Meter with Wake Up Switch

UNDERCARRIAGE

  • Rubber Belt (250 mm/10 in wide)
  • Dozer Blade
  • Dozer Blade Float
  • Hydraulic Track Adjusters
  • Tie Downs on Track Frame
  • Expandable Undercarriage
  • Rubber Belt (250 mm/10 in wide)
  • Dozer Blade
  • Dozer Blade Float
  • Hydraulic Track Adjusters
  • Tie Downs on Track Frame

BOOM, STICK AND LINKAGES

  • One Piece Boom (1850 mm/73 in)
  • Standard Stick (960 mm/37.8 in)
  • Front Shovel Capable
  • Front Shovel Capable – Pin-On
  • Thumb Ready (not available in all regions)
  • Certified Lifting Eye (optional in some regions)
  • One Piece Boom (1850 mm/73 in)
  • Standard Stick (960 mm/37.8 in)
  • Front Shovel Capable
  • Front Shovel Capable – Pin-On
  • Thumb Ready (not available in all regions)
  • Certified Lifting Eye (optional in some regions)

ELECTRICAL

  • 12 Volt Battery
  • Software (machine and monitor)
  • Maintenance Free Battery
  • Lock Out/Tag Out Battery Disconnect
  • Signaling/Warning Horn
  • 12 Volt Power Socket
  • 12 Volt Battery
  • Software (machine and monitor)
  • Maintenance Free Battery
  • Signaling/Warning Horn
  • 12 Volt Power Socket

GUARDING

  • ROPS – ISO 12117-2:2008
  • TOPS – ISO 12117:1997
  • Top Guard ISO 10262:1998
Optional Equipment

OPERATOR ENVIRONMENT

  • Cab with Air Conditioning
  • Cab with Heater
  • Cab with Air Conditioning
  • Control Pattern Changer (optional in some regions)
  • Cab with Heater
  • No Travel Pedals and Hand Levers
  • Control Pattern Changer (optional in some regions)
  • Push to Start with Key Fob/Pass Code
  • No Travel Pedals and Hand Levers
  • Vinyl Non-Suspension Seat (Canopy only)
  • Seat Belt Reminder System
  • Machine Security – Push to Start with Key Fob/Pass Code
  • Vinyl Non-Suspension Seat (Canopy only)
  • LED Front Lights
  • LED Front Lights
  • LED Front and Rear Lights
  • LED Front and Rear Lights
  • LED Boom Light
  • LED Boom Light
  • Mirrors Left and Right
  • Mirrors Left and Right
  • Radio – Bluetooth®, Auxiliary, Microphone, USB (charging only) (Cab only)
  • Radio – Bluetooth®, Auxiliary, Microphone, USB (charging only) (Cab only)

UNDERCARRIAGE

  • Expandable Undercarriage
  • Steel Track (250 mm/10 in wide)
  • Steel Track (250 mm/10 in wide)

BOOM, STICK AND LINKAGES

  • Long Stick (1160 mm/45.7 in)
  • Front Shovel Capable – Dual Lock Manual Coupler
  • Long Stick (1160 mm/45.7 in)
  • Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
  • Front Shovel Capable – Dual Lock Manual Coupler
  • 2nd Auxiliary Hydraulic Lines
  • Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
  • Boom Lowering Check Valve
  • 2nd Auxiliary Hydraulic Lines
  • Stick Lowering Check Valve
  • Boom Lowering Check Valve
  • Hydraulic Quick Coupler Lines (not available in all regions)
  • Stick Lowering Check Valve
  • Hydraulic Quick Coupler Lines (not available in all regions)

ELECTRICAL

  • Product Link PL243 (regulations apply)
  • Product Link PLE643 (regulations apply)
  • Travel Alarm (standard in some regions)
  • Battery Disconnect
  • Product Link PL243 (regulations apply)
  • Product Link PLE643 (regulations apply)
  • Travel Alarm (standard in some regions)

GUARDING

  • Polycarbonate Half Height Front Guard (Canopy only)
  • Polycarbonate Front Guard (ISO 10262:1998 Level 1 and EN356 PSA)
  • Guard, Canopy
  • Guard, Mesh

OTHER

  • Bio Oil Capable
  • Eco Drain
  • Water Jacket Heater
  • Bio Oil Capable
  • Eco Drain
  • Water Jacket Heater

A11 Auger For 1 Ton Mini Excavators

A11 Auger For 1 Ton Mini Excavators
Drive Shaft Torque at Maximum Pressure815 lb/ft
Drive MethodGerotor Motor - Direct Drive
Mounting Bracket Design1 Ton Mini Excavator Pin On

300 mm (12 in), 23 L (0.8 ft3) Pin On Digging Bucket With Bolt-On Teeth

300 mm (12 in), 23 L (0.8 ft3) Pin On Digging Bucket With Bolt-On Teeth
Width11.8 in
Capacity0.8 ft³
Weight68.6 lb

230 mm (9 in), 17 L (0.6 ft3) Pin On Digging Bucket With Bolt-On Teeth

230 mm (9 in), 17 L (0.6 ft3) Pin On Digging Bucket With Bolt-On Teeth
Width9.1 in
Capacity0.6 ft³
Weight64.8 lb