950M Wheel Loader | Front Loader | Tier 4

950M Wheel Loader | Front Loader | Tier 4

360° Exterior View

The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up ...
PDF Print SHARE

Engine

Emissions
Tier 4/Stage IV
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Engine Model
Cat C7.1
Peak Gross Torque - 1,300 rpm - ISO 14396
908ft·lbf
Maximum Power - 2,100 rpm - SAE J1995
250HP
Maximum Power - 2,100 rpm - ISO 14396 - Metric
253HP
Maximum Power - 2,100 rpm - ISO 14396
249HP
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
232HP
Maximum Net Power - 2,100 rpm - ISO 9249
230HP
Net Power - ISO 9249
230HP
Displacement
428in³
Maximum Net Power - 2,100 rpm - SAE J1349
230HP
Peak Gross Torque - 1,300 rpm - SAE J1995
911ft·lbf
Maximum Net Torque - 1,300 rpm
858ft·lbf

Engine - Tier 4 Final/Stage IV

Emissions
Tier 4/Stage IV

Weights

Operating Weight
42357lb
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)

Dimensions - Standard Lift

Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
36 degrees
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Hinge Pin Height at Maximum Lift
13.25ft
Hinge Pin Height at Carry Height
2.08ft
Height - Top of ROPS
11.33ft
Height - Top of Hood
8.83ft
Height - Top of Exhaust Pipe
11.17ft
Centerline of Rear Axle to Hitch
5.5ft
Ground Clearance
1.17ft
Centerline of Rear Axle to Edge of Counterweight
6.33ft
Lift Arm Clearance at Maximum Lift
10.75ft
Maximum Width - Over Tires - Loaded
9.25ft
Overall Length - Without Bucket
22.67ft
Tread Width
7ft
Wheel Base
11ft

Dimensions - High Lift

Rack Back at Ground
40 degrees
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Tread Width
7ft
Wheel Base
11ft
Overall Length - Without Bucket
24.58ft
Maximum Width - Over Tires - Loaded
9.25ft
Lift Arm Clearance at Maximum Lift
11.92ft
Hinge Pin Height at Maximum Lift
14.83ft
Hinge Pin Height at Carry Height
2.58ft
Height - Top of ROPS
11.33ft
Height - Top of Hood
8.83ft
Height - Top of Exhaust Pipe
11.17ft
Ground Clearance
1.17ft
Centerline of Rear Axle to Hitch
5.5ft
Centerline of Rear Axle to Edge of Counterweight
6.33ft
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Bucket Capacities

Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)

Sound

With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
69dB(A)
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
104 LWA***

Hydraulic System

Implement Pump Type
Variable Axial Piston
Hydraulic Cycle Time - Total
8.9s
Implement System - Maximum Pump Output at 2,150 rpm
76gal/min
Implement System - Maximum Operating Pressure
4250psi

Service Refill Capacities

Transmission
11.4gal (US)
Hydraulic Tank
33gal (US)
Fuel Tank
72.6gal (US)
Differential - Final Drives - Rear
11.4gal (US)
Differential - Final Drives - Front
11.4gal (US)
DEF Tank
4.2gal (US)
Crankcase
5.8gal (US)
Cooling System
15.6gal (US)

Transmission

Reverse - 3
16mile/h
Reverse - 2
7.5mile/h
Reverse - 1
4.3mile/h
Forward - 4
16mile/h
Forward - 3
12mile/h
Forward - 1
4.3mile/h
Forward - 2
7.5mile/h
Forward - 5
24.5mile/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.

Operating Specifications

Breakout Force
40690lbf
Static Tipping Load - Full 40° Turn - With Tire Deflection
24262lb
Static Tipping Load - Full 40° Turn - No Tire Deflection
25926lb
Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Dimensions

Hinge Pin Height at Carry Height
25in
Hinge Pin Height at Maximum Lift
159in
Ground Clearance
14in
Centerline of Rear Axle to Edge of Counterweight
76in
Height - Top of Exhaust Pipe
90in
Centerline of Rear Axle to Hitch
66in
Height - Top of Hood
106in
Height - Top of ROPS
92in
Wheel Base
132in
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Maximum Width over Tires (loaded)
111in
Overall Length (without bucket)
272in
Tread Width
84in

RELIABILITY YOU CAN COUNT ON

  • Cat C7.1 engine offers increased power density with a combination of proven electronic fuel and air systems.
  • Equipped with automatic Cat regeneration system, Cat clean emissions module (CEM) with Diesel Particulate Filter (DPF), and Diesel Exhaust Fluid (DEF) tank and pump (Tier 4 Final, Stage IV, and Stage V only).
  • Features an electric fuel priming pump and a fuel/water separator.
  • Thorough component design and machine validation processes result in unmatched reliability and uptime.

LONG TERM VALUE AND DURABILITY

  • Tough transmission and axles handle extreme applications.
  • Automatic powershift (5F/3R) transmission features durable, long-lasting components.
  • Full-flow hydraulic filtration system with additional loop filtrationimproves hydraulic system strength and component life.
  • Full hydraulic enclosed wet-disc with Integrated Braking System(IBS) and brake wear indicators add valued safety on the job.

ACHIEVE GREATER PRODUCTIVITY

  • Increased engine power resulting in improved machine performance and response.
  • With 5-speed transmission and lock-up clutch torque converter, power trains deliver smooth shifting, fast acceleration, and speed on grade for greater performance and fuel efficiency.
  • Optimized Z-bar linkage provides high breakout force at ground level along with excellent parallelism for precise work tool control.
  • Easy-to-load performance series buckets improve material retention and reduce dig times, significantly improving productivity and fuel efficiency.
  • Differential locks are activated on-the-go, which improves traction, resulting in increased productivity while reducing tire scuffing for reduced operating costs.
  • Automatic idle engine shutdown system significantly reduces idle time, overall operatinghours, and fuel consumption.

DO MORE WITH LESS FUEL

  • Deep system integration results in lower fuel consumption.
  • Significantly more fuel efficient than both the H and K Series loaders.
  • Power dense engine burns less fuel by providing power and torque when needed.
  • Significantly improved performance and fuel economy through engine speed and overall system heat load reduction.
  • Standard productive economy mode delivers more fuel savings with minimal productivity impact.

TECHNOLOGY THAT GETS WORK DONE

  • Developed to monitor, manage, and enhance your job site operations.
  • Payload provides accurate weighing* of the materials you are loading and hauling. Payload data is displayed in real-time to improve productivity and reduce overloading.
  • Detect enhances awareness of the environment around working equipment and provides alerts to help keep people and assets safe on the job site.
  • Link wirelessly connects you to your equipment, giving you access to essential information you need to know to run your business. Gain valuable insight into how your machine or fleet is performing allowing you to make timely, fact-based decisions that can boost job site efficiency and productivity.
  • Optional Advanced Productivity subscription providescomprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

    *Not legal for trade.

SAFELY HOME EVERY DAY

  • Cab access with wide door, optional remote door opening, and stair-like steps add solid stability.
  • Floor-to-ceiling windshield, large mirrors with integrated spot mirrors, and rear-vision camera provide industry leading all-around visibility.
  • Computerized monitoring system includes several warning indicators.
  • Rear vision camera enhances visibility behind the machine, helping you work safely and confidently.
  • Optional rear object detection radar system warns you of an object in critical zone while going in reverse, enhancing job site safety.

SAVE ON SERVICE AND MAINTENANCE

  • Extended service intervals including -
  1. Engine oil and engine oil filter change interval up to 1000 hours (Tier 4 Final, Stage IV, and Stage V only)
  2. Hydraulic filter change interval up to 1000
  3. Transmission oil change interval up to 2000 hours
  • One-piece tilting hood makes cab access fast and easy.
  • Electrical service centers enhance convenience and accessibility.
  • Access to fuel fill and daily maintenance points means less servicing time is required.
  • Optional integrated Cat autolube system provides full lube system monitoring and diagnostic test visibility.
  • Remote flash support
  • Longer tire life with on-the-go traction aids

DESIGNED FOR OPERATORS

  • The next generation easily adjustable seat with updated styling and a revolutionary suspension system. It comes in three trim levels and can be equipped with a 4-point harness.
  • Sound-suppression, seals, and damping cab mounts decrease noise and vibration for a quieter work environment.
  • Low-effort conventional steering wheel standard.
  • Optional seat-mounted electro-hydraulic joystick steering system provides precision control and dramatically reduces arm fatigue, resulting in excellent comfort and accuracy.
  • Electrohydraulic (EH) controls, parking brake, and Single Axis Lever (SAL) lift and tilt function allow for better handling and control management.
  • Smart ergonomic controls are easy to use, intuitive, and user-friendly.
  • Touchscreen multi-function color display keeps operators focused.
  • The next generation of ride control works as a shock absorber, improving ride quality over rough terrain.
  • Enhanced inclined steps and convenient grab handles create a secure and accessible operating space.
  • Extended windows enhance visibility while convex and spot mirrors extend the driver’s view on the sides and rear.

Standard Equipment:

Optional Equipment:

    Power Train
    • Axles: Automatic front/rear differential locks; Axle oil cooler; Seal guards
    • Fan, VPF (variable pitch fan), automatic and manual control
    • Radiator, high debris with wider fin spacing
    Operator Environment
    • Door, remote opening system
    • Cover, HVAC metallic
    • EH controls, joystick lift and tilt - Additional roller switch for 4th function
    • EH controls, joystick lift and tilt - Additional integrated roller switched for 3rd and 4th functions
    • Filter, carbon fresh air
    • Mirrors, heated rearview external with integrated spot mirrors
    • Precleaner, HVAC
    • Precleaner, HVAC (RESPA)
    • Radio, AM/FM/CD/USB/MP3 Bluetooth with Satellite Sirius and XM
    • Radio, CB ready
    • Seat, heated air suspension
    • Seat belt, 76 mm (3 in) retractable, with indicator
    • Steering, EH wheel with directional FNR shifter and gear selector - Additional FNR with implement controls
    • Roof, metallic
    • Steering, secondary
    • Sun visor, rear
    • Windows, rubber mounted
    • Windows, with front guard
    • Windows, with heavy duty front guard
    • Windows, with full guards front, rear and sides
    Electrical And Lighting
    • Four additional auxiliary halogen cab mounted work lights or
    • Two additional auxiliary front HI LED and two additional auxiliary rear LED cab mounted work lights with 2 LED work lights in the radiator grill and LED front turn signals also includes replacement of the standard four halogen cab mounted work lights with four LED work lights (standard offering and only roading light available is the halogen roading light)
    • Warning amber strobe beacon
    • Reversing strobes
    • External seat belt indicator light
    • Speed limiter - 20 km/h (Europe only)
    Starters, Batteries, And Alternators
    • Cold start - 120V
    • Cold start - 240V
    Cat Connect Technologies
    • Link technologies: VIMS
    • Payload technologies: Advanced Productivity subscription; Cat Production Measurement 2.0; Printer; Aggregate Autodig
    • Detect technologies: Cat Rear Object Detection
    • Machine Security System
    Work Tools
    • Fusion quick coupler
    • Performance Series buckets
    • Millyard forks
    • Grapple forks
    • Logging forks
    • Log and lumber forks
    • Pallet forks
    • Millyard pole forks
    • Woodchip buckets
    • High dump buckets
    Hydraulics
    • 3rd function with Ride Control
    • 4th function with Ride Control
    Fluids
    • Premixed extended life coolant with freeze protection to -50° C (-58° F)
    Other Optional Equipment
    • Cat Autolube System
    • Fenders, roading
    • Guard, power train
    • Oil change, high speed engine
    • Precleaner, turbine
    • Precleaner, trash
    • Wheel chocks
    • Low profile tires
    • Auto idle shutdown