953D Waste Handler
Engine
- Engine Model
- Cat® C6.6 ACERT™
- Flywheel Power
- 148HP
Weights
- Operating Weight
- 34381lb
Buckets
- Capacity - General Purpose Landfill
- 3yd³
- Capacity - Multi-Purpose Landfill
- 2.74yd³
- Width - General Purpose Landfill
- 96.8in
- Width - Multi-Purpose Landfill
- 99.8in
Undercarriage
- Track Shoe Width - Standard
- 18.9in
- Track Shoe Width - Optional
- 15in
- Track Gauge
- 71in
- Track on Ground
- 91.3in
- Ground Contact Area - Standard Shoe
- 2790in²
- Ground Contact Area - Optional Shoe
- 3410in²
- Ground Pressure - Standard Shoe
- 9.5psi
- Ground Pressure - Optional Shoe
- 12.3psi
- Track Shoe Type
- Double Grouser
Operating Specifications
- Track on Ground
- 91.3in
- Ground Pressure
- 9.5psi
- Maximum Travel Speed
- 6.2mile/h
Standards
- Standards
- Standards
Service Refill Capacities
- Fuel Tank
- 83.5gal (US)
- Cooling System
- 8gal (US)
- Crankcase - With Filter
- 4.4gal (US)
- Final Drive - Each
- 2.8gal (US)
- Hydraulic Tank
- 18.5gal (US)
Ripper Specifications
- Type
- Radial
- Number of Pockets
- 3
- Overall Width/Beam
- 76.9in
- Penetration
- 9.45in
- Ripping Width
- 70.9in
Hydraulic System - Implement
- Total Cycle Time
- 10.6s
- Type
- Close center load sensing/piston
- Cycle Time - Dump
- 1.5s
- Relief Valve Setting
- 4061psi
- Float Down
- 3.2s
- Output - Maximum
- 30.8gal/min
- Cycle Time - Raise
- 5.9s
Waste Handling Arrangement
- Final Drive Seal Guards
Protects the Duo Cone seal against wrapping of wires or plastics.
- Hydraulic Reversible Fan
Purges the debris from the air inlets by reversing the airflow. Limits radiator plugging and increases maintenance interval.
- Turbine Precleaner
Increase engine air filter life by pre-cleaning the air.
- Guard, Idler and Lift Lines
Protects and limits the entry of debris into the tensioning system and lift lines. It includes scrapers mounted around idler.
- Rubber Mounted Windshield
Makes the windshield replacement easy and fast.
- Eight Lights
Increase work time with four lights at the front and four at the back.
- Hinged Grill and Radiator Fan
Provides excellent access to radiator and fan for cleaning.
- Extensive Sealing
Improved sealing between engine enclosure, cab and frame limits radiator plugging.
Options
- Center Holes Shoes
The center holes in the track allow sprocket to punch out dirt and debris, that prevents an increase of track wear caused by an abnormal track tension. This is the best choice in landfill.
- Striker Bars
Very useful in landfills, the striker bars removes waste from the tracks to prevent damaging the fenders and the cab. Equipped with a step, it facilitate the access to the cab from the rear.
- General Purpose Bucket - Landfill
This trash rack increases the standard bucket capacity to move low density materials.
- Multi-Purpose Bucket - Landfill
This buckets provides the ability to load, push, grab. Trash rack increases the standard MP bucket capacity to move low density materials.
- Guard, Cab Lights and Windshield Screen
Provides additional protection to the windshield and the lights against debris.
- Guard Track Roller
Provides additional protection for rollers and reduce debris entry inside the links.
- Tilt Cab System
The D-Series enables the cab to tilt up to 90°. The optional hydraulic jack provides a 30° tilting capability recommended for an easy servicing in the field.
- Fast Fill System
Special port and vent designed to minimize the fuel tank refill time and increase productivity.