3512C Land Electric-Drive Drilling Module with Dynamic Gas Blending

3512C Land Electric-Drive Drilling Module with Dynamic Gas Blending

360° Exterior View

Oil and gas drilling is a complex task that requires specialized power generation equipment. Cat 3500 power modules with Dynamic Gas Blending offer the lowest owning and operating ...
PDF Print SHARE

Engine Specifications

Emissions
U.S. EPA Nonroad Tier 2
Weight
31864lb
Stroke
7.48in
Oil Change Interval
500h
Generator Set Control
EMCP 4.4
Generator
SR4B
Fuel System
EUI
Engine Control and Protection
ADEM A3
Displacement
3158in³
Bore
6.69in
Aspiration
Turbocharged-Aftercooled
Voltage
600

Dimensions

Width
91.3in
Length
238.2in
Height
104.7in

Capacity for Liquids

Cooling System - Engine
41gal (US)
Lube Oil System - Refill
84gal (US)

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Testing

- Every Cat generator set is full-load tested to ensure proper engine performance. - Standard configurations are assembled, tested, and validated as a package to ensure performance, reliability and durability.

Product Support Offered Through Global Cat Dealer Network

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: • Internal engine component condition • Presence of unwanted fluids • Presence of combustion by-products • Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Standard Equipment:

Optional Equipment:

    Control System
    • Engine control options:
    • ADEM A3 ECU, left-hand mounted
    • Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls
    • Load sharing governor, 2301A
    Instrumentation
    • Emergency stop button
    • Analog gauges:
    • Service port connector
    • Customer connection terminal blocks
    • Communications module PL1000T
    • Communications module PL1000E
    • Thermocouples installed, one per cylinder
    Lubrication System
    • Custom oil filter
    • RH installed centrifugal oil filter
    • SAE15W40, Caterpillar DEO, 500 hour
    • Crankcase fumes disposal
    • Oil level regulator
    • Crankcase breather
    • Oil cooler
    • Shallow oil pan
    • Oil drain extension, 2 in NPT female connection
    • Simplex oil filter
    Mounting System
    • Custom inner base
    • Custom outer base
    • Package isolator supports (3), for mounting inner base to customer-supplied base
    • 4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
    Power Take-off
    • Alternator, 24V, 68A
    Protection System
    • Explosion relief valves (3)
    • Metal particle detector switch
    • Metal particle detector with annunciator
    • Engine alarms, derate, and shutdown in abnormal operation
    Starting System
    • Custom starting motor
    • Air pressure regulator
    • TDI air starting motor, RH - 1034 kPa (150 psi)
    General
    • LH installed engine barring group
    • Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
    • Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
    • Jacket water heater lines
    • Paint - Cat yellow