3406C Well Servicing HazPak

3406C Well Servicing HazPak

When the job takes you into a hazardous location, Cat® HazPak engines are ready. Our complete range of services and engine packages cover both industry standards and your ...
PDF Print SHARE

Package Specifications

Minimum Rating
490BHP
Maximum Rating
490BHP
Peak Torque - Speed
2161 N•m (1594 lb-ft) @ 1400 rpm
Displacement
893in³
Aspiration
Turbocharged-Aftercooled
Governor and Protection
Hydromechanical
Weight - Net Dry - Approximate
6481.6lb
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE 1
Stroke
6.5in
Bore
5.4in
Flywheel Teeth
113
Emissions
Non-certified

Capacity for Liquids

Lube Oil System - Refill
40qt (US)
Cooling System
79.9qt (US)

Standard Equipment:

Optional Equipment:

    Air Compressor
    • Belt-driven, two-cylinder, single-stage, reciprocating with a rated displacement of 13.2 cfm at 1250 rpm compressor speed; includes two environmental drains
    Charging System
    • 24V 35A EX d ATEX compliant alternator for Gas Group IIB, temperature class T3; heavy-duty, brushless. 24V 65A alternator, NEC 500 Class 1 Division 2 for Gas Groups C&D, temperature Class T3; heavy-duty, brushless. 24V 55Ah EX d e II T4 increased safety deep discharge battery pack with integral junction box and isolator switch.
    Control System
    • Air or hydraulic shutdown system input options available
    • Basic control panel – includes start button, run/stop switch, and emergency stop button.
    • PCS2 control board – provides supervisory safety system functionality and overspeed shutdown control; includes start button, run/stop switch, emergency stop button, mounting locations for throttle control and messenger display, userconfigurable alarm and shutdown relay inputs.
    • 3GP control panel – provides gas detection, supervisory safety system functionality, and overspeed shutdown control; allows operation without exhaust flame traps; includes start button, run/stop switch, emergency stop button, mounting locations for throttle control and messenger display; provides control panel for engine with up to 20 inputs and outputs; designed to give automatic shutdown in the event of engine overspeed, high exhaust gas temperature (200°C), high coolant temperature (100°C), low oil pressure, detection of hydrocarbon gas; additional I/O pressure and temp input switches available on request.
    Fuel System
    • Fuel cooler, installed, maintains acceptable fuel temperature when running from day tank
    Starting System
    • Air and hydraulic starters available