Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

Print SHARE

Clean Emissions Module (CEM) - Dimensions

6 Brick Z-Flow - Length
147.7in
6 Brick Z-Flow - Height
23.5in
6 Brick Z-Flow - Width
43.5in
6 Brick Z-Flow - Weight
1246lb
6 Brick U-Flow - Length
85in
6 Brick U-Flow - Height
23.5in
6 Brick U-Flow - Width
56.9in
6 Brick U-Flow - Weight
1235lb
Dosing Cabinet - Length
37.4in
Dosing Cabinet - Height
22.8in
Dosing Cabinet - Width
18.8in
Dosing Cabinet - Weight
209lb

Dimensions & Weights

Minimum Length
83.9in
Maximum Length
89.8in
Minimum Height
59.3in
Maximum Height
63.5in
Minimum Width
57.1in
Maximum Width
57.3in
Minimum Engine Dry Weight
6950lb
Maximum Engine Dry Weight
7160lb

Engine Specifications

Configuration
Vee 12, 4-stroke-cycle diesel
Emissions
U.S. EPA Tier 4 Final certified IMO III emissions certified (SCR required)
Rated Engine Speed
1600-2150 rpm
Bore
5.71in
Stroke
6.38in
Displacement
1959in³
Aspiration
Turbocharged-aftercooled aspiration
Governor
Electronic (A5 ECM)
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan
Oil Change Interval
1000 hrs - deep pan
Cooling
Heat exchanger or keel cooled
Flywheel Housing
SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Rotation
Counterclockwise from flywheel end

Air Inlet System

Separate-circuit aftercooling – no sea water in aftercooler

Emissions

Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment

Control Strategy

Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs, Extends emissions useful life, Ensures compliance, Flexible to urea quality

Fuel System

Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

Standard Equipment:

Optional Equipment:

    Air Inlet System
    • Closed crankcase fumes disposal
    Alarm And Protection
    • MECP I control panel
    • MECP III B control panel with Cat® Alarm and Protection System
    Charging System
    • Charging alternator
    Fuel System
    • Manual or electric fuel priming pump
    • Fuel cooler
    Lube System
    • Duplex oil filters
    Power Take-offs
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
    Starting System
    • Starting motors – air, electric or dual