CG170-20 Gas Generator Set
Generator Set Specifications
- Maximum Continuous Rating
-
2000 ekW @1.0pf
- Fuel Type
-
Natural Gas, Biogas, Coal Gas
- Maximum Electrical Efficiency
-
43.70%
- Maximum Standby Rating
-
2000
- Frequency
-
50 / 60 Hz
- RPM
-
1500
Engine Specifications
- Engine Model
-
CG170-20
- Displacement
-
3240in³
- Aspiration
-
TA
- Bore
-
6.7in
- Stroke
-
7.7in
Generator Set Dimensions
- Length
-
294in
- Width
-
67in
- Height
-
86in
- Dry Weight - Genset
-
43651.1lb
High Efficiency, Lower Operating Costs
- Miller cycle timing with combustion chamber and spark plug improvement help on saving up to 15% fuel gas per year
- CG170 (non-miller) is optimized for Island-Mode capability
- Gearbox helps limit wear and tear on engine components, lowering operating costs and increasing availability
Low installation, Building and Operating Costs
- Extended maintenance intervals thanks to sooth-free combustion and enlarged oil tank
- Low fuel consumption due to improved combustion chamber and pre-chamber spark-plugs
- Flexible fields of application also with fluctuating gas qualities due to Total Electronic Management (TEM)
- Optimized oil management
Optimized Lubrication Consumption
- Consumes up to 1900 liter less lube oil per year than comparable models<li>
- Longer lubricant change and oil change intervals<li>
Standard Equipment:
- Air Inlet
-
- Turbocharger with a water-cooled bearing case for all cylinder
- One-element single-stage air cleaner with enclosure and sevice indicator
- Control Panels
-
- TEM (Total Electronic Management)
- Cooling
-
- Jacket water and SCAC thermostats
- flange connections for JW inlet and outlet
- Electrical jacket water and aftercooler coolant pump
- Exhaust
-
- Closed crankcase ventilation system
- PEARL/Low resistence exhaust system
- Exhaust waste gate for the CG170-20
- Fuel System
-
- Pre-chamber spark plugs
- Electronic fuel metering valve
- Independently controlled cylinder monitoring and ignition system
- Generator
-
- Winding temperature detectors
- 3-phase sensing and KVAR/PF control
- Reactive droop
- closed-coupled generator result in no torque transmission to the base frame
- grid code generator
- Anti-condensation space heater
- Busbar connections
- Starting/charging
-
- 24V starting motors
- Battery disconnect switch
- General
-
- Crankshaft vibration damper and guard
Optional Equipment: