3512A with Flexible Packagin

3512A with Flexible Packagin

The 3512A generator set with Flexible Packaging has been developed for a wide range of applications, from emergency standby installations such as healthcare and datacenters to continuously powering ...
PDF Print SHARE

Generator Set Specifications

Minimum Rating
1000 kVA
Maximum Rating
1400 kVA
Voltage
220 to 13800
Frequency
50 Hz
Speed
1500 RPM
Height - Maximum
93.2in
Length - Maximum
222.7in
Width - Maximum
77.8in

Generator Set Configurations

Emissions/Fuel Strategy
Low Fuel Consumption, Low Emissions

Engine Specifications

Engine Model
C32 TA, V-12, 4-Stroke Water-Cooled Diesel
Bore
145 mm (5.71 in)
Displacement
32.1 L (1958.86 in3)
Stroke
162 mm (6.38 in)
Compression Ratio
15.0:1
Aspiration
TA
Governor Type
Adem™A4
Fuel System
MEUI
Exhaust Flange Size - Internal Diameter
203.2 mm (8.0 in)
Air Inlet
Single element canister style with service indicator

Standard Equipment:

Optional Equipment:

    Air Inlet System
    • Dual Element air cleaners
    • Remote air inlet adaptors
    • Air Inlet protection
    Circuit Breakers
    • Optional busbar power connections
    • Breaker harnesses
    • Center posts busbars
    • Cable entry options
    • Controls packaging - Enclosures
    • EMAX circuit breakers
    • 2000, 2500, 3200 and 4000 Amp, 3 pole, IEC rated circuit breakers
    • 2000, 2500, 3200 and 4000 Amp, 4 pole, IEC rated circuit breakers
    • Busbar connections
    • EMAX breakers connections
    Control Panels
    • EMCP 4.3, EMCP 4.4
    • Customer connection mounting locations
    • Annunciator Modules
    • Governors
    • Mounting Group - External Box Clips
    • Auxiliary Boxes
    • Customer Interface Options
    • Generator Temperature Monitoring
    • Remote speed adjust
    • Vandle proof panel door
    • Local PC monitoring
    • Ground (Automatically selected)
    • Optional radiator arrangements
    Cooling System
    • Water level switch gauges
    • Heat exchangers
    • European Union Certification
    European Certifications
    • EU declaration of conformity
    • Eurasian conformity (EAC) mark
    • European directive genset, DoI (Declaration of Incorporation)
    • Mufflers
    Exhaust System
    • Muffler mounting kits
    • Flexible fittings
    • Through-wall installation kit
    • Primary fuel filter
    Fuel System
    • 1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, internal excitation, No. of leads = 6, pitch= 0.6667
    Generators And Attachments
    • 1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, permanent magnet, No. of leads = 6, pitch= 0.6667
    • 1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, form wound, permanent magnet, No. of leads = 6, pitch= 0.6667
    • Generator conversion
    • Space heater
    • Pyrometer and thermocouples
    Instrumentation
    • Oil level Reg-1 shallow pan
    Lube System
    • Electric prelube pumps
    • Manual prelube sump pumps
    • Spring-type vibration isolator
    Mounting System
    • IBC vibration isolators
    • Explosion relief valve
    Protection System
    • Neutral grounding connection
    Special Tests / Reports
    • Neutral ground-LV
    • PGS test report @ 1.0 power factor
    • PGS test report @ 0.80 power factor
    • IBC seismic certifications
    • 10 Amp battery chargers
    Starting / Charging Systems
    • 20 Amp battery charger
    • Oversize battery set
    • 24 Volt dual electric starting motor
    • Ether starting aid
    • Jacket water heaters
    • Engine barring group
    General