980M Wheel Loader

Get 0% for 60 months on Cat Compact Equipment Learn More

980M Wheel Loader

360° Exterior View

The 980M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. Deep system integration provides you with a machine ...
PDF Print SHARE

Engine - Tier 3/Stage IIIA Equivalent

Emissions
Tier 3/Stage IIIA

Weights

Operating Weight
66337lb
Note
Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7

Buckets

Bucket Capacities
4.2-12.2 m³ (5.25-16.0 yd³)

Dimensions - Standard Lift

Rack Back at Ground
40 degrees
Rack Back - Carry Height
48 degrees
Note
All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Rack Back - Maximum Lift
61 degrees
Maximum Width over Tires
10.83ft
Lift Arm Clearance at Maximum Lift
12.42ft
Hinge Pin Height at Maximum Lift
14.83ft
Hinge Pin Height at Carry
2.08ft
Height - Top of ROPS
12.58ft
Height - Top of Hood
10.25ft
Ground Clearance
1.42ft
Height - Top of Exhaust Pipe
12.33ft
Centerline of Rear Axle to Edge of Counterweight
8.17ft
Centerline of Rear Axle to Hitch
6.25ft
Overall Length - Without Bucket
26.17ft
Tread Width
8ft
Wheel Base
12.5ft

Transmission

Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.
Reverse - 4
24.5mile/h
Reverse - 3
16.7mile/h
Reverse - 2
9.4mile/h
Reverse - 1
4.8mile/h
Forward - 4
24.5mile/h
Forward - 3
14.6mile/h
Forward - 2
8.3mile/h
Forward - 1
4.3mile/h

Operating Specifications

Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6.
Note (1)
For a machine configuration as defined under ?Weight.?
Breakout Force
50357lbf
Static Tipping Load - Full 40° Turn - No Tire Deflection
45847lb
Static Tipping Load - Full 40° Turn - With Tire Deflection
43133lb

Dimensions - High Lift

Rack Back at Ground
39 degrees
Rack Back - Maximum Lift
61 degrees
Rack Back - Carry Height
48 degrees
Note
All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Wheel Base
12.5ft
Tread Width
8ft
Overall Length - Without Bucket
26.83ft
Maximum Width over Tires
10.83ft
Lift Arm Clearance at Maximum Lift
13.08ft
Hinge Pin Height at Maximum Lift
15.58ft
Hinge Pin Height at Carry
2.25ft
Height - Top of Hood
10.25ft
Height - Top of ROPS
12.58ft
Height - Top of Exhaust Pipe
12.33ft
Centerline of Rear Axle to Hitch
6.25ft
Ground Clearance
1.42ft
Centerline of Rear Axle to Edge of Counterweight
8.17ft

Bucket Capacities

Bucket Range
4.2-12.2 m³ (5.25-16.0 yd³)

Sound

With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
78 dB(A)*
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
112dB(A)
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
75dB(A)

Service Refill Capacities

Transmission
20.3gal (US)
Hydraulic Tank
40gal (US)
Fuel Tank
112.5gal (US)
Differential - Final Drives - Rear
22gal (US)
Differential - Final Drives - Front
22gal (US)
Cooling System
12gal (US)
Crankcase
9.8gal (US)

Hydraulic System

Implement System - Maximum Pump Output at 2,250 rpm
119gal/min
Implement System - Maximum Operating Pressure
4975psi
Hydraulic Cycle Time - Total
10.1s

Engine

Maximum Power - 1,800 rpm - SAE J1995
412HP
Displacement
763in³
Net Power - ISO 9249
373HP
Maximum Power - 1,800 rpm - ISO 14396
406HP
Maximum Net Power - 1,800 rpm - ISO 9249
373HP
Maximum Net Power - 1,800 rpm - ISO 9249 - Metric
378HP
Maximum Net Power - 1,800 rpm - SAE J1349
373HP
Maximum Net Power - 1,800 rpm - SAE J1349 - Metric
378HP
Maximum Net Torque - 1,000 rpm
1505lb/ft
Maximum Power - 1,800 rpm - ISO 14396 - Metric
412HP
Maximum Power - 1,800 rpm - SAE J1995 - Metric
417HP
Peak Gross Torque - 1,300 rpm - ISO 14396
1602lb/ft
Peak Gross Torque - 1,300 rpm - SAE J1995
1617lb/ft
Engine Model
Cat C13 ACERT

Standard Equipment:

Optional Equipment: