966M Wheel Loader | Front Loader | Tier 3

966M Wheel Loader | Front Loader | Tier 3

360° Exterior View

The 966M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in ...
PDF Print SHARE

Engine - Tier 3/Stage IIIA Equivalent

Emissions
Tier 3/Stage IIIA

Weights

Operating Weight
51176lb
Note
Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

Bucket Capacities
3.20-7.40 m³ (4.19-9.68 yd³)

Transmission

Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
Reverse - 4
24.5mile/h
Reverse - 3
16.1mile/h
Reverse - 2
8.9mile/h
Reverse - 1
4.4mile/h
Forward - 4
24.5mile/h
Forward - 3
14.6mile/h
Forward - 2
8.1mile/h
Forward - 1
4mile/h

Sound

With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
76 dB(A)*
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
109dB(A)
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)

Dimensions - Standard Lift

Rack Back at Ground
42 degrees
Rack Back - Carry Height
50 degrees
Rack Back - Maximum Lift
62 degrees
Note
All dimensions are approximate and based on L3 XHA2 tires.
Height - Top of Hood
9.25ft
Height - Top of Exhaust Pipe
11.58ft
Height - Top of ROPS
11.75ft
Ground Clearance
1.42ft
Centerline of Rear Axle to Edge of Counterweight
7.17ft
Centerline of Rear Axle to Hitch
5.83ft
Wheel Base
11.67ft
Overall Length - Without Bucket
23.92ft
Hinge Pin Height at Maximum Lift
13.92ft
Hinge Pin Height at Carry
2.08ft
Lift Arm Clearance at Maximum Lift
11.92ft
Maximum Width over Tires
9.92ft
Tread Width
7.33ft

Operating Specifications

Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 37° Turn - With Tire Deflection
32329lb
Static Tipping Load - Full 37° Turn - No Tire Deflection
34873lb
Breakout Force
38984lbf

Dimensions - High Lift

Rack Back at Ground
39 degrees
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
71 degrees
Note
All dimensions are approximate and based on L3 XHA2 tires.
Height - Top of Hood
9.25ft
Height - Top of Exhaust Pipe
11.58ft
Height - Top of ROPS
11.75ft
Ground Clearance
1.42ft
Centerline of Rear Axle to Edge of Counterweight
8.17ft
Centerline of Rear Axle to Hitch
5.83ft
Wheel Base
11.67ft
Overall Length - Without Bucket
26.58ft
Hinge Pin Height at Maximum Lift
15.75ft
Hinge Pin Height at Carry
2.58ft
Lift Arm Clearance at Maximum Lift
13.5ft
Maximum Width over Tires
9.92ft
Tread Width
7.33ft

Hydraulic System

Implement Pump Type
Variable Displacement Piston
Hydraulic Cycle Time - Total
10.1s
Implement System - Maximum Pump Output at 2,200 rpm
95gal/min
Implement System - Maximum Operating Pressure
4496psi

Bucket Capacities

Bucket Range
3.20-7.40 m³ (4.19-9.68 yd³)

Engine

Engine Model
Cat C9.3 ACERT
Peak Gross Torque - 1,200 rpm - SAE J1995
1180ft-lb
Peak Gross Torque - 1,200 rpm - ISO 14396
1166ft-lb
Maximum Net Torque - 1,000 rpm
1112ft-lb
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric
281HP
Displacement
568in³
Maximum Net Power - 1,700 rpm - ISO 9249
278HP
Maximum Net Power - 1,700 rpm - SAE J1349 - Metric
281HP
Maximum Power - 1,800 rpm - SAE J1995 - Metric
313HP
Maximum Power - 1,800 rpm - SAE J1995
308HP
Maximum Power - 1,800 rpm - ISO 14396 - Metric
309HP
Maximum Power - 1,800 rpm - ISO 14396
304HP
Maximum Net Power - 1,700 rpm - SAE J1349
278HP
Net Power - ISO 9249
278HP

Service Refill Capacities

Fuel Tank
79.8gal (US)
Differential - Final Drives - Rear
15.1gal (US)
Differential - Final Drives - Front
15.1gal (US)
Hydraulic Tank
33gal (US)
Transmission
15.5gal (US)
Crankcase
6.5gal (US)
Cooling System
18.9gal (US)

Reliability

        

  • Cat® C9.3 ACERT™ engine offers increased power density with a combination of proven electronic, fuel and air systems.
  •     

  • Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.

Durability

        

  • Heavy-duty powershift transmission and axles handle extreme applications.
  •     

  • Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.

Productivity

        

  • Engine power increased by approximately 10% improves machine performance and response (compared to H Series).
  •     

  • Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
  •     

  • Z-bar linkage provides high breakout force at ground level.
  •     

  • Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
  •     

  • On-the-go disc-type front manual differential locks (front and rear fully automatic option).
  •     

  • Optional Aggregate Handler configuration offers slightly higher payload capability for loose aggregate rehandling.*

*Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.

Fuel Efficiency

        

  • Up to 10% more fuel efficient than K Series and up to 25% more fuel efficient than H Series loaders.**
  •     

  • Power dense ACERT engine burns less fuel by providing power and torque when needed.
  •     

  • Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.

**Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

Ease of Operation

        

  • Best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
  •     

  • E-H joystick steering (steering wheel optional) with force feedback for precision control and dramatically decreases operator arm fatigue.
  •     

  • Intuitive, ergonomic controls and touch screen multifunction display keep operators focused on their work.
  •     

  • Ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.

Safety

        

  • Excellent cab access with wide door, remote door opening option and stair-like steps.
  •     

  • Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.

Serviceability

        

  • One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
  •     

  • Safe, ground level access to fuel fill and daily maintenance points means less servicing time is required.
  •     

  • Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.

Cat Connect Technology

        

  • Monitor, manage and enhance job site operations.
  •     

  • Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
  •     

  • Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
  •     

  • Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

Standard Equipment:

Optional Equipment: