962M Wheel Loader

Get 0% for 60 months on Cat Compact Equipment Learn More

962M Wheel Loader

360° Exterior View

The 962M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up ...
PDF Print SHARE

Engine - Tier 4 Final/Stage IV

Emissions
Tier 4/Stage IV

Weights

Operating Weight
44591lb
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)

Transmission

Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Reverse - 3
16mile/h
Reverse - 2
7.5mile/h
Reverse - 1
4.3mile/h
Forward - 3
12mile/h
Forward - 4
16mile/h
Forward - 2
7.5mile/h
Forward - 1
4.3mile/h
Forward - 5
24.5mile/h

Sound

With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
104 LWA***
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
69dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*

Operating Specifications

Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Breakout Force
42489lbf
Static Tipping Load - Full 40° Turn - With Tire Deflection
25814lb
Static Tipping Load - Full 40° Turn - No Tire Deflection
27494lb
Note (1)
For a machine configuration as defined under ?Weight.?

Dimensions - Standard Lift

Tread Width
7ft
Overall Length - Without Bucket
23.75ft
Lift Arm Clearance at Maximum Lift
11.33ft
Hinge Pin Height at Maximum Lift
13.92ft
Height - Top of ROPS
11.33ft
Height - Top of Hood
8.83ft
Height - Top of Exhaust Pipe
11.17ft
Ground Clearance
1.17ft
Centerline of Rear Axle to Hitch
5.5ft
Centerline of Rear Axle to Edge of Counterweight
7.08ft
Hinge Pin Height at Carry Height
2.17ft
Maximum Width - Over Tires - Loaded
9.25ft
Wheel Base
11ft
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
37 degrees
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Dimensions - High Lift

Wheel Base
11ft
Tread Width
7ft
Overall Length - Without Bucket
23.75ft
Lift Arm Clearance at Maximum Lift
11.83ft
Hinge Pin Height at Maximum Lift
14.83ft
Height - Top of ROPS
11.33ft
Ground Clearance
1.17ft
Height - Top of Exhaust Pipe
11.17ft
Height - Top of Hood
8.83ft
Centerline of Rear Axle to Hitch
5.5ft
Centerline of Rear Axle to Edge of Counterweight
7.08ft
Hinge Pin Height at Carry Height
2.58ft
Maximum Width - Over Tires - Loaded
9.25ft
Rack Back at Ground
37 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back - Carry Height
49 degrees
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Service Refill Capacities

Transmission
11.4gal (US)
Hydraulic Tank
33gal (US)
Fuel Tank
72.6gal (US)
Differential - Final Drives - Rear
11.4gal (US)
Differential - Final Drives - Front
11.4gal (US)
DEF Tank
4.2gal (US)
Crankcase
5.8gal (US)
Cooling System
15.6gal (US)

Hydraulic System

Hydraulic Cycle Time - Total
8.9s
Implement System - Maximum Pump Output at 2,150 rpm
76gal/min
Implement System - Maximum Operating Pressure
4250psi
Implement Pump Type
Variable Axial Piston

Engine

Peak Gross Torque - 1,350 rpm - SAE J1995
921ft·lbf
Peak Gross Torque - 1,350 rpm - ISO 14396
918ft·lbf
Maximum Power - 2,100 rpm - SAE J1995
271HP
Maximum Power - 2,100 rpm - ISO 14396 - Metric
273HP
Maximum Power - 2,100 rpm - ISO 14396
269HP
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
253HP
Maximum Net Power - 2,100 rpm - ISO 9249
250HP
Displacement
428in³
Net Power - ISO 9249
250HP
Maximum Net Power - 2,100 rpm - SAE J1349
250HP
Maximum Net Torque - 1,350 rpm
865ft·lbf
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Engine Model
Cat C7.1 ACERT

Bucket Capacities

Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)

Standard Equipment:

Optional Equipment: