950M Wheel Loader

Get 0% for 60 months on Cat Compact Equipment Learn More

950M Wheel Loader

360° Exterior View

The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up ...
PDF Print SHARE

Engine - Tier 4 Final/Stage IV

Emissions
Tier 3/Stage IIIA

Weights

Operating Weight
42360lb
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)

Sound

Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107dB(A)

Transmission

Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Reverse - 3
16mile/h
Reverse - 2
7.5mile/h
Reverse - 1
4.3mile/h
Forward - 4
16mile/h
Forward - 2
7.5mile/h
Forward - 3
12mile/h
Forward - 1
4.3mile/h
Forward - 5
24.5mile/h

Operating Specifications

Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Breakout Force
40690lbf
Static Tipping Load - Full 40° Turn - No Tire Deflection
25926lb
Static Tipping Load - Full 40° Turn - With Tire Deflection
24262lb

Dimensions - Standard Lift

Rack Back - Carry Height
46 degrees
Rack Back at Ground
38 degrees
Rack Back - Maximum Lift
59 degrees
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Wheel Base
11ft
Tread Width
7ft
Overall Length - Without Bucket
22.67ft
Lift Arm Clearance at Maximum Lift
10.75ft
Maximum Width - Over Tires - Loaded
9.33ft
Height - Top of ROPS
11.33ft
Hinge Pin Height at Carry Height
2.08ft
Hinge Pin Height at Maximum Lift
13.25ft
Height - Top of Hood
8.83ft
Height - Top of Exhaust Pipe
11.17ft
Ground Clearance
1.17ft
Centerline of Rear Axle to Hitch
5.5ft
Centerline of Rear Axle to Edge of Counterweight
6.33ft

Dimensions - High Lift

Rack Back at Ground
42 degrees
Rack Back - Maximum Lift
56 degrees
Rack Back - Carry Height
49 degrees
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Wheel Base
11ft
Tread Width
7ft
Overall Length - Without Bucket
24.58ft
Maximum Width - Over Tires - Loaded
9.33ft
Lift Arm Clearance at Maximum Lift
11.92ft
Hinge Pin Height at Maximum Lift
14.83ft
Hinge Pin Height at Carry Height
2.58ft
Height - Top of ROPS
11.33ft
Height - Top of Exhaust Pipe
11.17ft
Height - Top of Hood
8.83ft
Ground Clearance
1.17ft
Centerline of Rear Axle to Hitch
5.5ft
Centerline of Rear Axle to Edge of Counterweight
6.83ft

Bucket Capacities

Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)

Engine

Maximum Net Torque - 1,400 rpm
726ft-lb
Peak Gross Torque - 1,400 rpm - SAE J1995
777ft-lb
Peak Gross Torque - 1,400 rpm - ISO 14396
774ft-lb
Maximum Power - 2,000 rpm - SAE J1995
263HP
Maximum Power - 2,000 rpm - ISO 14396 - Metric
265HP
Maximum Power - 2,000 rpm - ISO 14396
261HP
Maximum Net Power - 2,000 rpm - SAE J1349
248HP
Maximum Net Power - 2,000 rpm - ISO 9249 - Metric
252HP
Maximum Net Power - 2,000 rpm - ISO 9249
248HP
Displacement
428in³
Net Power - ISO 9249
248HP
Engine Model
Cat C7.1 ACERT

Service Refill Capacities

Transmission
11.4gal (US)
Hydraulic Tank
33gal (US)
Fuel Tank
72.6gal (US)
Differential - Final Drives - Rear
11.4gal (US)
Differential - Final Drives - Front
11.4gal (US)
Crankcase
5.8gal (US)
Cooling System
15.6gal (US)

Hydraulic System

Hydraulic Cycle Time - Total
9.1s
Implement System - Maximum Pump Output at 2,150 rpm
76gal/min
Implement System - Maximum Operating Pressure
4250psi
Implement Pump Type
Variable Axial Piston

Standard Equipment:

Optional Equipment: