930M Waste Handler Small Wheel Loader

930M Waste Handler Small Wheel Loader

360° Exterior View (HTML5)

The Cat 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 ACERT engine works in concert with an ...
PDF Print SHARE

Engine

Maximum Gross Power
164HP
Bore
4in
Stroke
5in
Displacement
427in³
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
162HP
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
154HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158HP
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156HP
Note (4)
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600r/min
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160HP
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162HP
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
566ft·lbf
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
566ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
572ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4)
572ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592ft·lbf
Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4)
592ft·lbf
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
157HP
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
160HP
Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4)
1800r/min
Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4)
164HP
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4)
166HP
Engine Model
Cat® C7.1 ACERT™
Maximum Rated Gross Power - ISO 14396
164HP
Maximum Rated Gross Power - ISO 14396 (DIN)
166HP

Weights

Operating Weight
33396lb

Buckets

Bucket Capacities
3.0-5.0 m3 (3.9-6.5 yd3)

Cab

ROPS
ISO 3471: 2008
FOPS
ISO 3449: 2005 LEVEL II
Note (2)
The Blue Angel environmental label is an optional attachment for Europe only.
Note (1)
*Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows clo
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68dB(A)
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101dB(A)

Loader Hydraulic System

Tilt Cylinder, Double Acting - Stroke
21.9in
Tilt Cylinder, Double Acting - Rod Diameter
3.5in
Tilt Cylinder, Double Acting - Bore Diameter
5.9in
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3626psi
Relief Pressure - Tilt Cylinder
4061psi
Note (3)
*3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Maximum Working Pressure - Implement Pump
3626psi
Maximum Flow - Implement Pump - 3rd Function*
50gal/min
Maximum Flow - Implement Pump
50gal/min
Lift Cylinder, Double Acting - Stroke
28.7in
Lift Cylinder, Double Acting - Rod Diameter
2.6in
Lift Cylinder, Double Acting - Bore Diameter
4.7in
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
4061psi

Operating Specifications

Full Turn Tip Load
18163lb

Power Train

Brakes - Parking
Spring applied hydraulically released
Brakes - Service
Inboard wet disc
Front Axle
Fixed
Front Axle - Traction Aid*
Locking differential (standard)
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2)
Offset rims available to meet European roading requirements.
Note (3)
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear Axle
Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Rear Axle - Traction Aid - Optional
Limited slip differential

Service Refill Capacities

Cooling System
7.9gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Engine Crankcase
5.3gal (US)
Front Axles
6.9gal (US)
Fuel Tank
51.5gal (US)
Hydraulic System - Including Tank
43.6gal (US)
Hydraulic Tank
23.8gal (US)
Rear Axles
6.6gal (US)
Transmission - Gear Box
2.2gal (US)

Steering

Maximum Flow - Steering Pump
34gal/min
Maximum Steering Torque - 0° (Straight Machine)
37155ft·lbf
Maximum Steering Torque - 40° (Full Turn)
27747ft·lbf
Maximum Working Pressure - Steering Pump
3500psi
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8s
Steering Cylinder, Double Acting - Bore Diameter
2.8in
Steering Cylinder, Double Acting - Rod Diameter
1.6in
Steering Cylinder, Double Acting - Stroke
17.2in

Transmission

Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8mile/h
Forward and Reverse - Range 3
17mile/h
Forward and Reverse - Range 4
25mile/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).

Standard Equipment:

Optional Equipment:

    Options
    • Antifreeze/coolant, extended-life
    • Auto lube, integrated in touch screen display
    • Auxiliary flow, third and fourth function
    • Axles, differential, limited slip, rear
    • Axles, elevated breathers
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe):
      – Automatic blower control
      – Electrically adjustable heated mirrors (2)
      – LED interior lighting
      – Touch screen display
    • Ride control adjustable speed activation
    • Preventative maintenance reminders
    • Integrated help function (22 languages available)
    • Sunscreen, front and rear
    • Camera, rearview (standard in Europe)
    • Cat Production Measurement (CPM) – fully integrated scale system, with optional printer that can print up to three copies of the weigh ticket
    • Cold start package:
      – Ether starting aid, block heater and additional batteries 1,000 CCA (four in total)
    • Coupler, (Fusion and ISO 23727)
    • Debris packages:
      – Low – standard six fins per inch package
      – Medium – reversing fan and Syklone precleaner
      – High – adds a sealed alternator to medium package
    • Fenders (extended cover and full coverage)
    • Guards:
      – Power train, (lower, side, driveshaft and crankcase)
      – Windshield and lights
      – Cylinders, tilt and steering
    • Lights, auxiliary, halogen or LED with engine compartment lights
    • Rear Object Detection
    • Radio packages:
      – Radio ready with Bluetooth
      – Radio, AM/FM with Bluetooth and clock
      – Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
    • Seats:
      – Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
    • Steering:
      – Dual mode and Secondary
    • Tires:
      – Bias ply, 17.5, 20.5-25
      – Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
    • Tire Pressure Monitoring (TPM) – fully integrated system with high and low pressure alerts
    • Toolbox – 0.03 m3 (1.2 ft3) of undercab storage
    • Work tools