930M Ag Handler

930M Ag Handler

360° Exterior View (HTML5)

PDF Print SHARE

Engine

Maximum Gross Power
164HP
Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4)
143HP
Note (3)
*Range 4 power is boosted to be the same as Performance Mode.
Note (2)
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
Note (1)
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592ft·lbf
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
592ft·lbf
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
164HP
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
166HP
Displacement (Standard Power Mode: Speed Range 1-3*)
427in³
Emissions
Engine meets Tier 4 Final emission standards.
Displacement (Performance Power Mode: Speed Range 1-4)
427in³
Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)
141HP
Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*)
154HP
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600r/min
Engine Model
Cat C7.1 ACERT
Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*)
158HP
Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*)
566ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*)
572ft·lbf
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800r/min
Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4)
157HP
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4)
162HP
Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4)
566ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4)
572ft·lbf

Weights

Operating Weight
31876lb

Buckets

Bucket Capacities
3.1-5.0 m3 (4.0-6.5 yd3)
Bucket Capacities - Light Material
3.1-5.0 m3 (4.0-6.5 yd3)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (2)
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)

Tires

Standard Size
20.5 R25, radial (L-3)
Other Choices Include
20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.

Steering

Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed
2.4s
Steering Articulation Angle - Each Direction
40°
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5turns
Maximum Working Pressure - Steering Pump
3500psi
Maximum Steering Torque - 40° (Full Turn)
27747ft·lbf
Maximum Steering Torque - 0° (Straight Machine)
37155ft·lbf
Maximum Flow - Steering Pump
34gal/min

Service Refill Capacities

Transmission - Gear Box
2.2gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Hydraulic Tank
23.8gal (US)
Hydraulic System - Including Tank
43.6gal (US)
Fuel Tank
51.5gal (US)
Engine Crankcase
5.3gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Cooling System
7.9gal (US)
Axles - Front
6.9gal (US)
Axles - Rear
6.6gal (US)

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
4061psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
4061psi
Relief Pressure - Tilt Cylinder
4351psi
Note
*Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Maximum Working Pressure - Implement Pump
4061psi
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42gal/min
Maximum Flow - Implement Pump - 3rd Function*
50gal/min
Maximum Flow - Implement Pump
50gal/min
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time
8.2s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift
4.8s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level
1.8s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height
1.6s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time
7.5s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift
4.3s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level
1.8s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height
1.4s

Axles

Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front
Fixed; Locking differential (standard)

Dimensions and Operating Specifications (Approximate) - 3.1 m³ (4.1 yd³) Bucket

Height - Ground to Cab**
10.92ft
Height - Ground to Beacon**
12.08ft
Height - Ground Axle Center**
2.17ft
Height - Ground Clearance**
1.25ft
Length - Overall*
27.25ft
Length - Rear Axle to Bumper
6.5ft
Length - Hitch to Front Axle
4.92ft
Length - Wheel Base
9.83ft
Clearance - Bucket at 45° *
10.42ft
Clearance - Loadover Height**
11.58ft
Clearance - Level Bucket**
13.33ft
Height - Bucket Pin**
14.42ft
Height - Overall**
18.67ft
Reach - Bucket at 45°*
4.42ft
Carry Height - Bucket Pin
2ft
Dig Depth**
5.3in
Width - Bucket
9ft
Width - Tread Center
6.25ft
Turning Radius - Over Bucket
20.92ft
Width - Over Tires
8.33ft
Turning Radius - Outside of Tires
17.67ft
Turning Radius - Inside of Tires
9.33ft
Rack Angle at Full Lift
51 degrees
Dump Angle at Full Lift
44 degrees
Rack Angle at Carry
48 degrees
Departure Angle
33 degrees
Articulation Angle
40 degrees
Tipping Load - Straight - ISO 14397-1*
16430lb
Tipping Load - Full Turn - ISO 14397-1*
13934lb
Breakout*
18808lb
Operating Weight*
31876lb
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Dimensions and Operating Specifications (Approximate) - 3.5 m³ (4.6 yd³) Bucket

Height - Ground to Cab**
10.92ft
Height - Ground to Beacon**
12.08ft
Height - Ground Axle Center**
2.17ft
Height - Ground Clearance**
1.25ft
Length - Overall*
27.58ft
Length - Rear Axle to Bumper
6.5ft
Length - Hitch to Front Axle
4.92ft
Length - Wheel Base
9.83ft
Clearance - Bucket at 45° *
10.17ft
Clearance - Loadover Height**
11.58ft
Clearance - Level Bucket**
13.33ft
Height - Bucket Pin**
14.42ft
Height - Overall**
19ft
Reach - Bucket at 45°*
4.67ft
Carry Height - Bucket Pin
2ft
Dig Depth**
5.3in
Width - Bucket
9ft
Width - Tread Center
6.25ft
Turning Radius - Over Bucket
21.92ft
Width - Over Tires
8.33ft
Turning Radius - Outside of Tires
17.67ft
Turning Radius - Inside of Tires
9.33ft
Rack Angle at Full Lift
51 degrees
Dump Angle at Full Lift
44 degrees
Rack Angle at Carry
48 degrees
Departure Angle
33 degrees
Articulation Angle
40 degrees
Tipping Load - Straight - ISO 14397-1*
16070lb
Tipping Load - Full Turn - ISO 14397-1*
13592lb
Breakout*
17246lb
Operating Weight*
32136lb
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Transmission

Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8mile/h
Forward and Reverse - Range 3
17mile/h
Forward and Reverse - Range 4
25mile/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

Standard Equipment:

Optional Equipment:

    Optional Equipment
    • Auto lube, integrated in secondary display
    • Auxiliary flow, third and fourth function, adjustable through secondary display
    • Auxiliary tool box
    • Beacon light, strobe
    • Cab, deluxe
      • Electrically adjustable external heated mirrors (2)
      • Secondary touch screen display to enable features and adjust parameters
      • Sunscreen, front and rear
      • Windshield washing access steps
    • Camera, rearview
    • Cat Production Measurement weigh scale system integrated into secondary display
    • Cold start package
    • Coupler, (Fusion and ISO 23727)
    • Fenders (extended cover and full coverage)
    • Guarding (machine and operator)
    • Guarding (power train and light)
    • Lights, auxiliary, halogen or LED with engine compartment lights
    • Limited slip rear axle
    • Object Detection
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      • Deluxe seat – fully adjustable fabric air suspension seat with mid backrest and mechanical lumbar support
      • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      • Dual mode and secondary
    • Tire Pressure Monitoring (TPM) integrated into secondary display