930M Ag Handler Small Wheel Loader

930M Ag Handler Small Wheel Loader

360° Exterior View (HTML5)

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power ...
PDF Print Share

Engine

Maximum Gross Power
168HP
Note (3)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (2)
**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (1)
*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168HP
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170HP
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
Displacement (Performance Power Mode: Speed Range 1-4)
428in³
Engine Model
Cat® C7.1
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800r/min
Stroke - Performance Power Mode: Range 1-4
5.3in
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601ft·lbf
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
1600r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
158HP
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
160HP
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
162HP
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
797N·m
Note (4)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Bore (Standard Power Mode: Range 1-4)
4.1in
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156HP
Stroke (Standard Power Mode: Range 1-3**)
5.3in
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164HP
Bore (Standard Power Mode: Range 1-3**)
4.1in
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
795N·m
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
776N·m
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163HP
Displacement (Standard Power Mode: Range 1-3**)
428in³
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
573ft·lbf
Maximum Rated Gross Power - ISO 14396
168HP
Maximum Rated Gross Power - ISO 14396 (metric)
170mhp

Weights

Operating Weight
31382lb

Buckets

Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)
Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101dB(A)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68dB(A)

Tires

Standard Size
20.5 R25, radial (L-3)
Other Choices Include
20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Steering

Steering Articulation Angle - Each Direction
40°
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5turns
Maximum Working Pressure - Steering Pump
3500psi
Maximum Flow - Steering Pump
34gal/min
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4s
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cylinder, Double Acting - Bore Diameter
2.8in
Steering Cylinder, Double Acting - Stroke
17.2in
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8s
Steering Cylinder, Double Acting - Rod Diameter
1.6in

Service Refill Capacities

Transmission - Gear Box
2.2gal (US)
Hydraulic Tank
23.8gal (US)
Hydraulic System - Including Tank
43.6gal (US)
Fuel Tank
51.5gal (US)
Engine Crankcase
5.3gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Cooling System
7.9gal (US)
Axles - Front
6.9gal (US)
Axles - Rear
6.6gal (US)

Loader Hydraulic System

Relief Pressure - Tilt Cylinder
4351psi
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Maximum Working Pressure - Implement Pump
4061psi
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42gal/min
Maximum Flow - Implement Pump
50gal/min
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
1.5s
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times - 1,600 rpm - Standard: Total Cycle Time
10.1s
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
9.3s
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
2.7s
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
5.1s
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
2.7s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061psi
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
1.7s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351psi
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
5.7s
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50gal/min
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.3in
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
2.8in
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.4in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.1in
Lift Cylinder: Standard Lift Linkage - Stroke
28.7in

Transmission

Reverse - Range 1*
8mile/h
Forward - Range 1*
1-13 km/h (0.6-8 mph)
Forward - Range 2
8mile/h
Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
Reverse - Range 4
25mile/h
Reverse - Range 2
8mile/h
Forward - Range 3
17mile/h
Forward - Range 4
25mile/h
Reverse - Range 3
17mile/h

Axles

Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front
Fixed; Locking differential (standard)

Power Train

Note
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
Rear Axle
Oscillating
Note (2)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Front Axle
Fixed
Front Axle - Traction Aid*
Locking differential standard
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25
± 10.5 degrees
Brakes - Service
Inboard wet disc
Rear Axle - Traction Aid
Limited slip differential optional
Brakes - Parking
Spring applied hydraulically released
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65
± 7 degrees

Dimensions with Bucket - Standard Lift

Height - Ground Clearance**
1.3ft
Rack Angle at Carry
43°
Departure Angle
33°
Length - Wheel Base
9.8ft
Length - Rear Axle to Bumper
6.5ft
Turning Radius - Over Bucket
19.5ft
Carry Height - Bucket Pin
1.3ft
Width - Over Tires
8.3ft
Note (2)
**Vary with tire.
Dig Depth**
3.9in
Turning Radius - Outside of Tires
17.7ft
Clearance - Level Bucket**
11.75ft
Clearance - Bucket at 45°*
9.1ft
Rack Angle at Full Lift
54°
Height - Overall**
17.1ft
Width - Bucket
8.4ft
Height - Ground to Axle Center**
2.25ft
Height - Bucket Pin**
12.8ft
Operating Weight
31125lb
Width - Tread Center
6.3ft
Turning Radius - Inside of Tires
9.4ft
Reach - Bucket at 45°*
3.6ft
Length - Overall*
24.9ft
Clearance - Load over Height**
10.9ft
Length - Hitch to Front Axle
4.9ft
Height - Ground to Beacon**
12.2ft
Articulation Angle
40°
Height - Ground to Cab**
10.9ft
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note (1)
*Vary with bucket.
Dump Angle at Full Lift
48°

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Dimensions with Bucket - High Lift

Length - Rear Axle to Bumper
6.5ft
Departure Angle
33°
Height - Overall**
18.7ft
Reach - Bucket at 45°*
4.4ft
Dump Angle at Full Lift
48°
Width - Bucket
8.4ft
Length - Wheel Base
9.8ft
Width - Tread Center
6.3ft
Length - Hitch to Front Axle
4.9ft
Height - Ground to Axle Center**
2.25ft
Note (1)
*Vary with bucket.
Clearance - Bucket at 45°*
10.7ft
Height - Bucket Pin**
14.4ft
Height - Ground to Beacon**
12.2ft
Carry Height - Bucket Pin
1.9ft
Clearance - Load over Height**
11.6ft
Turning Radius - Outside of Tires
17.7ft
Turning Radius - Over Bucket
20.6ft
Rack Angle at Full Lift
51°
Rack Angle at Carry
47°
Length - Overall*
27ft
Note (2)
**Vary with tire.
Height - Ground to Cab**
10.9ft
Turning Radius - Inside of Tires
9.4ft
Clearance - Level Bucket**
13.4ft
Width - Over Tires
8.3ft
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Dig Depth**
5.3in
Articulation Angle
40°
Operating Weight
31441lb
Height - Ground Clearance**
1.3ft

Operating Specifications

Full Turn Tip Load
19424lb

Standard Equipment:

Optional Equipment:

    Optional Equipment
    • Auto lube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe)
      • Camera, rear view integrated into advanced display
      • Electrically adjustable external heated mirrors (2)
      • Secondary display to enable features and adjust parameters
      • LED interior lighting
      • Sunscreen, front and rear
      • Touchscreen secondary display
      • Ride control adjustable speed activation
      • Preventative maintenance reminders
      • Integrated help function (26 languages)
    • Camera, roof mounted, front view with separate display
    • Cat Production Measurement weigh scale system integrated into secondary display
    • Cold start package
      • Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Coupler, (Fusion and ISO 23727)
    • Fenders (extended cover and full coverage)
    • Differential, limited slip, rear
    • Guarding packages
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Linkage, high lift
    • Payload Technology
      • Cat Production Measurement (CPM)
      • CPM Printer
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      • Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      • Dual mode and secondary
    • Tire Pressure Monitoring (TPM)
    • Counterweight, additional options
    • Debris packages (low, medium, high)
    • Rear Object Detection