926M Aggregate Handler Small Wheel Loader

926M Aggregate Handler Small Wheel Loader

360° Exterior View

The Cat® 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power ...
PDF Print SHARE

Engine

Maximum Gross Power
155HP
Bore
4in
Stroke
5in
Displacement
427in³
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
517ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
151HP
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
141HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
144HP
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
142HP
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600r/min
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
146HP
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
148HP
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
511ft·lbf
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
511ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
531ft·lbf
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
531ft·lbf
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage IV off-highway emission standards.
Engine Model
Cat® C7.1
Rated Net Power
148HP
Maximum Rated Gross Power - ISO 14396
153HP
Maximum Rated Gross Power - ISO 14396 (DIN)
155HP
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800r/min
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
153HP
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
155HP
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
148HP
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
149HP
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
517ft·lbf

Weights

Operating Weight
29256lb
Note
Aggregate Handler machine equipped with side guards and roading fenders.

Buckets

Bucket Capacities
3.0-5.0 m³ (3.9-6.5 yd³)

Cab

ROPS
ISO 3471:2008
Note (1)
*Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows clo
Declared Sound Levels
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
FOPS
ISO 3449:2005 LEVEL II

Operating Specifications

Note
Aggregate Handler machine equipped with side guards and roading fenders.
Full Turn Tip Load
17350lb

Loader Hydraulic System

Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
40gal/min
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061psi
Tilt Cylinder, Double Acting - Stroke
21.9in
Tilt Cylinder, Double Acting - Rod Diameter
2.8in
Tilt Cylinder, Double Acting - Bore Diameter
5.1in
Relief Pressure - Tilt Cylinder
4061psi
Note (3)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Maximum Working Pressure - Implement Pump
3771psi
Maximum Flow - Implement Pump
40gal/min
Lift Cylinder, Double Acting - Stroke
28.7in
Lift Cylinder, Double Acting - Rod Diameter
2.4in
Lift Cylinder, Double Acting - Bore Diameter
4.3in
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.6/10.5 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.5/6.2 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.6/2.6 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
40gal/min

Steering

Maximum Flow - Steering Pump
34gal/min
Maximum Steering Torque - 0° (Straight Machine)
37155ft·lbf
Maximum Steering Torque - 40° (Full Turn)
27747ft·lbf
Maximum Working Pressure - Steering Pump
3500psi
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8s
Steering Cylinder, Double Acting - Bore Diameter
2.8in
Steering Cylinder, Double Acting - Rod Diameter
1.6in
Steering Cylinder, Double Acting - Stroke
17.2in

Service Refill Capacities

Transmission - Gear Box
2.2gal (US)
Rear Axles
5.5gal (US)
Hydraulic Tank
23.8gal (US)
Hydraulic System - Including Tank
42.3gal (US)
Front Axles
5.5gal (US)
Fuel Tank
51.5gal (US)
Engine Crankcase
5.3gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)
Cooling System
7.9gal (US)

Power Train

Rear Axle - Traction Aid - Optional
Limited slip differential
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Rear Axle
Oscillating
Note (3)
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Note (2)
Offset rims available to meet European roading requirements.
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Front Axle
Fixed
Brakes - Service
Inboard wet disc
Brakes - Parking
Spring applied hydraulically released
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25
± 13.5 degrees
Front Axle - Traction Aid*
Locking differential (standard)

Transmission

Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8mile/h
Forward and Reverse - Range 3
17mile/h
Forward and Reverse - Range 4
25mile/h
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Application Specific Configuration

INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

  • Saves fuel and reduces cab sound levels
  • Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

  • Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
  • Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Automatic climate control with heated rear glass and external mirrors
  • Information at a glance with large primary LCD display
  • Heated and cooled seat option
  • Optional Ride Control
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

Customize Your Experience

The M Series Aggregate Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.

  • Select your Power Train Mode
  • Reduce tire wear using Rimpull
  • Fine tune ground speed with Creeper Control
  • Adjustable Electo-Hydraulic Controls
  • Set Directional Shift Response based on job application

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

  • Product Link™ PRO standard with optional subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Standard Equipment:

Optional Equipment:

    Optional Equipment
    • Antifreeze/coolant, extended-life
    • Autolube, integrated in secondary display
    • Auxiliary flow, third function
    • Axles, differential, limited slip, rear
    • Axles, elevated breathers
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe):
      – Automatic blower control
      – Electrically adjustable heated mirrors (2)
      – LED interior lighting
      – Secondary display to adjust settings
    • Ride control adjustable speed activation
    • Preventative maintenance reminders
    • Integrated help function (22 languages available)
    • Sunscreen, front and rear
    • Camera, rearview (standard in Europe)
    • Camera, front view (May be required for local EU requirements.)
    • Cold start package:
      – Ether starting aid, block heater and additional batteries 1,000 CCA (4 in total)
    • Coupler, (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guards
      – Power train, (lower, side, driveshaft and crankcase)
      – Windshield and lights
      – Cylinders, tilt and steering
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Lights, roading LED
    • Rear Object Detection
    • Radio packages:
      – Radio ready with Bluetooth
      – Radio, AM/FM with Bluetooth and clock
      – Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
    • Seats:
      – Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
    • Steering:
      – Dual mode and Secondary
    • Tires:
      – Bias ply, 17.5, 20.5-25
      – Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
    • Work tools