272D3 XE Skid Steer Loader

272D3 XE Skid Steer Loader

360° Exterior View (HTML5)

The Cat® 272D3 XE Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work tool productivity, ...
PDF Print SHARE

Engine

Gross Power - SAE J1995
110HP
Net Power - SAE 1349
106HP
Displacement
232in³
Stroke
4.7in
Bore
3.9in
Engine Model
Cat C3.8 DIT (turbo)
Net Flywheel Power
106HP
Net Power - ISO 9249
107HP
Peak Torque - 1,500 rpm - SAE J1995
276ft·lbf

Operating Specifications

Rated Operating Capacity
3700lb
Tipping Load
7400lb
Breakout Force - Tilt Cylinder
7362lb
Breakout Force - Lift Cylinder
6085lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rated Operating Capacity with Optional Counterweight
3950lb

Weights

Operating Weight
9573lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA

Dimensions

Wheel Base
54.6in
Height - Top of Cab
84in
Vehicle Width over Tires
76in
Ground Clearance
10.4in
Departure Angle
28°
Maximum Dump Angle
51°
Bumper Overhang - Behind Rear Axle
46.2in
Turning Radius from Center - Machine Rear
74.7in
Length - Without Bucket
127in
Reach - Maximum Lift/Dump
29in
Clearance at Maximum Lift and Dump
97.4in
Bucket Pin Height - Maximum Lift
128.6in
Bucket Pin Height - Carry Position
9.3in
Turning Radius from Center - Coupler
57.7in
Bucket Pin Reach - Maximum Lift
13.5in
Rack Back Angle - Maximum Height
84°
Maximum Overall Height
161.5in
Length - With Bucket on Ground
155in
Maximum Reach - With Arms Parallel to Ground
49.1in
Turning Radius from Center - Bucket (racked)
90.6in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Roll Back Angle
28°

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Service Refill Capacities

Cooling System
4.1gal (US)
Engine Crankcase
3.5gal (US)
Fuel Tank
31.7gal (US)
Hydraulic System
14.5gal (US)
Hydraulic Tank
10.3gal (US)
Chain Box - Each Side
2.7gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)

Hydraulic System

Standard Flow Mode - Loader Hydraulic Pressure
3335psi
Standard Flow Mode - Hydraulic Power - Calculated
44HP
Standard Flow Mode - Loader Hydraulic Flow
23gal/min
Note
*When equipped with Cat 400 Series work tools.
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
4061psi
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
40gal/min
Hydraulic Flow - XE - Hydraulic Power (calculated)
94HP

Power Train

Travel Speed - Forward or Reverse - One Speed
7.2mile/h
Travel Speed - Forward or Reverse - Two Speed
10.3mile/h

Air Conditioning System (if equipped)

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Outside Cab***
104dB(A)
Inside Cab**
83dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

A Smooth Ride

A standard, Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.

*Photo shown may vary from machine referenced.

Industry Leading Hydraulic Power

The 272D3 XE hydraulic system provides high flow and high pressure that delivers industry leading hydraulic horsepower to efficiently run even the most power hungry work tools.

Standard Equipment:

Optional Equipment:

    Optional Equipment
    • Beacon, Rotating
    • Engine Block Heater – 120V
    • Oil, Hydraulic, Cold Operation
    • Paint, Custom
    • Variable Speed Demand Fan with Reversing Functionality
    • External Counterweights
    • Product Link PL641, Cellular
    • Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)