272D2 XHP Skid Steer Loader

Get 0% for 60 months on Cat Compact Equipment Learn More

272D2 XHP Skid Steer Loader

The Cat® 272D2 XHP Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work ...
PDF Print SHARE

Engine

Engine Model
Cat C3.8 DIT (turbo)
Net Flywheel Power
106HP
Gross Power - SAE J1995
110HP
Net Power - SAE 1349
106HP
Displacement
232in³
Stroke
4.7in
Bore
3.9in
Peak Torque - 1,500 rpm - SAE J1995
276ft·lbf
Net Power - ISO 9249
107HP

Operating Specifications

Rated Operating Capacity
3650lb
Tipping Load
7300lb
Breakout Force - Tilt Cylinder
7362lb
Breakout Force - Lift Cylinder
6085lb
Rated Operating Capacity with Optional Counterweight
3900lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA

Weights

Operating Weight
9255lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA

Dimensions

Wheel Base
54.6in
Height - Top of Cab
84in
Vehicle Width over Tires
76in
Ground Clearance
10.4in
Departure Angle
28°
Maximum Dump Angle
51°
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Turning Radius from Center - Machine Rear
74.7in
Turning Radius from Center - Coupler
57.7in
Turning Radius from Center - Bucket (racked)
90.6in
Rack Back Angle - Maximum Height
84°
Maximum Reach - With Arms Parallel to Ground
49.1in
Maximum Overall Height
161.5in
Length - Without Bucket
127in
Length - With Bucket on Ground
155in
Clearance at Maximum Lift and Dump
97.4in
Bucket Pin Reach - Maximum Lift
13.5in
Bucket Pin Height - Maximum Lift
128.6in
Bucket Pin Height - Carry Position
9.3in
Reach - Maximum Lift/Dump
29in
Bumper Overhang - Behind Rear Axle
46.2in
Roll Back Angle
28°

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
FOPS Level II
ISO 3449:2005 Level II

Service Refill Capacities

Cooling System
4.1gal (US)
Engine Crankcase
3.5gal (US)
Fuel Tank
32.2gal (US)
Hydraulic System
14.5gal (US)
Hydraulic Tank
10.3gal (US)
Chain Box - Each Side
2.7gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Power Train

Travel Speed - Forward or Reverse - Two Speed
10.3mile/h
Travel Speed - Forward or Reverse - One Speed
7.2mile/h

Hydraulic System

Standard Flow Mode - Loader Hydraulic Flow
23gal/min
Standard Flow Mode - Hydraulic Power - Calculated
44HP
Note
*When equipped with Cat 400 Series work tools.
Hydraulic Flow - XHP - Maximum Loader Hydraulic Pressure
4061psi
Hydraulic Flow - XHP - Hydraulic Power (Calculated)
94HP
Hydraulic Flow - XHP - Maximum Loader Hydraulic Flow*
40gal/min
Standard Flow Mode - Loader Hydraulic Pressure
3335psi

Noise Level

Inside Cab**
83dB(A)
Outside Cab***
104dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Standard Equipment: