259D3 Compact Track Loader

259D3 Compact Track Loader

360° Exterior View (HTML5)

The Cat® 259D3 Compact Track Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides superior ...
PDF Print SHARE

Engine

Gross Power - SAE J1995
74.3HP
Displacement
203in³
Net Power
73.2HP
Bore
3.7in
Engine Model
Cat C3.3B DIT (turbo)
Gross Power
74.3HP
Net Power - SAE 1349
73.2HP
Stroke
4.7in
Peak Torque - 1,500 rpm - SAE J1995
195ft·lbf
Net Power - ISO 9249
73.9HP

Operating Specifications

Rated Operating Capacities - 35% Tipping Load
2010lb
Tipping Load
5745lb
Breakout Force - Tilt Cylinder
4965lb
Ground Contact Area - With 320 mm/12.6 in Track
1483in²
Ground Pressure - With 320 mm/12.6 in Track
6.1psi
Rated Operating Capacities - 50% Tipping Load
2870lb
Ground Contact Area - With 400 mm/15.7 in Track
1848in²
Rated Operating Capacity with Optional Counterweight
3060lb
Ground Pressure - With 400 mm/15.7 in Track
4.9psi
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr

Weights

Operating Weight
8987lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr

Dimensions

Length - Track on Ground
59in
Overall Length - Track
78.7in
Height - Top of Cab
83.1in
Ground Clearance
8.9in
Departure Angle
35°
Maximum Dump Angle
52°
Bucket Pin Height - Carry Position
7.8in
Vehicle Width (400 mm/15.7 in tracks)
69in
Turning Radius from Center - Coupler
54.8in
Bucket Pin Reach - Maximum Lift
9.4in
Vehicle Width (320 mm/12.6 in tracks)
66in
Maximum Reach - With Arms Parallel to Ground
51.4in
Maximum Overall Height
154.1in
Turning Radius from Center - Bucket
86in
Bucket Pin Height - Maximum Lift
121in
Length - Without Bucket
108.9in
Rack Back Angle - Maximum Height
87°
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr
Turning Radius from Center - Machine Rear
61.5in
Length - With Bucket on Ground
137.3in
Clearance at Maximum Lift and Dump
89.9in
Reach - Maximum Lift/Dump
23.9in

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Hydraulic System

Hydraulic Flow - High Flow - Loader Hydraulic Pressure
3335psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
58HP
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335psi
Hydraulic Flow - Standard - Loader Hydraulic Flow
20gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
39HP
Hydraulic Flow - High Flow - Loader Hydraulic Flow
30gal/min

Power Train

Travel Speed - Forward or Reverse - One Speed
5.9mile/h
Travel Speed - Forward or Reverse - Two Speed
8.5mile/h

Service Refill Capacities

Hydraulic System
13.2gal (US)
Fuel Tank
24.8gal (US)
Engine Crankcase
3gal (US)
Hydraulic Tank
10.3gal (US)
Cooling System
3.7gal (US)

Air Conditioning System (if equipped)

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab***
103dB(A)
Inside Cab**
83dB(A)
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

A Smooth Ride

A standard, fully independent torsion axle suspension combined with the optional Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

Standard Equipment:

Optional Equipment:

    Optional Equipment
    • Hand-Foot Style Controls
    • External Counterweights
    • Beacon, Rotating
    • Engine Block Heater – 120V
    • Oil, Hydraulic, Cold Operation
    • Paint, Custom
    • Product Link PL641, Cellular
    • Speed Sensitive Ride Control
    • Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)