6030 OEM

6030 OEM

Cat Frontless Hydraulic Shovels are loaded with options--giving you the flexibility to match the machine front to your specific application. These purpose-built specialty machines can be sourced through ...


Standard Bucket Capacity
Face Shovel (heaped 2:1) - 16.5 m3 (21.6 yd3); Backhoe (heaped 1:1) - 17.0 m3 (22.2 yd3)
Engine Output - SAE J1995
1140 kW (1,530 hp)
Operating Weight
Face Shovel - 294 tonnes (324 tons); Backhoe - 296 tonnes (326 tons)
Engine Output - SAE J1995 - 2 × Cat C27 ACERT


Maximum Drawbar Pull - Forward
Bottom Rollers - Each Side
Components (1)
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
Components (2)
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Components (3)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Components (4)
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
Gradeability - Travel Drives - Approximate
Maximum Tractive Force
Support Rollers - Each Side
2 plus a skid plate in between
Track Pads - Each Side
Travel Speed - 1st Stage - Maximum
Travel Speed - 2nd Stage - Maximum


Extra Wide

Service Refill Capacities

Hydraulic Tank
660gal (US)
Hydraulic System - Including Tank
925gal (US)
Grease Tank
120gal (US)
Fuel Tank
1339gal (US)

Automatic Lubrication System

Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
Capacity - Grease Barrel
120gal (US)


Engine Model
2 × Cat® C27 ACERT™
Net Power - SAE J1349
1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
U.S. EPA flex (Tier 2)
Gross Power - SAE J1995
1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)

Electrical System

System Voltage
Batteries in Series/Parallel Installation
4 × 210 Ah – 12V each; 420 Ah – 24V in total
Alternator Rating
2 × 150A

Operator's Cab

Components (2)
Fold-away auxiliary seat with safety belt
Components (1)
FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
Internal Dimensions of Cab - Height
Internal Dimensions of Cab - Length
Internal Dimensions of Cab - Width
Operator's Eye Level - Approximately

Hydraulic Oil Cooling

Maximum Flow
2 × 467 L/min (2 × 123 gal/min)
Diameter - Fan
2 × 1220 mm (2 × 48 in)

Hydraulic System with Pump Managing System

Swing Pumps - Maximum Flow - Diesel
2 × 394 L/min (2 × 104 gal/min)
Maximum Pressure - Travel Swing Pumps
Main Pumps - Maximum Total Oil Flow
4 × 552 L/min (4 × 146 gal/min)
Main Pumps
4 × variable swash plate pumps
Maximum Pressure - Attachment
Maximum Pressure - Swing Pumps
Swing Pumps
2 × reversible swash plate double pumps

Swing System

Maximum Swing Speed - Diesel Version
Parking Brakes
Wet multiple-disc brake, spring-loaded/hydraulically released
Swing Drive
2 compact planetary transmissions with axial piston motors
Swing Ring
Triple-race roller bearing with sealed internal gearing


Frontless Weight

Long Reach

Long Reach excavators provide extra reach needed for deep digging applications, finishing/grading of embankments, and for dredging under water.

VA Booms

Variable Adjustable (VA) boom configured machines offer improved right-side visibility, better roading balance, improved versatility when working in tight quarters, and are able to lift heavy loads. VA-style booms offer improved flexibility and versatility versus a standard one-piece boom.

Extending Booms & Sticks

Extending booms provide extra-long reach in unique applications, such as working alongside of a pier or access to a subway shaft. Oftentimes the work tools used in such applications develop a square hole. Typical work tool for this application is a clamshell-style bucket.

Material Handlers

Whether you operate indoors in areas with limited space such as a transfer or recycling station, or outdoors in a scrap yard or waterway/port application, material handlers are purpose-designed and built for excellent reach, flexibility and lift performance to meet the tough requirements of material handling applications. Special features such as heavy-duty frames and wide undercarriage ensure aggressive performance, reliability and excellent productivity. A variety of Cat grapples are also available to maximize machine performance in material handling applications.

Ultra High Demolition

UHD machines can reach higher and are capable of supporting the work tools you need for your demo job. Fronts can be interchangeable, making your demo jobs safer and faster. Caterpillar offers best-in-class work tools for bigger and more versatile demolition applications.


Rippers are typically large hydraulic excavators equipped with short, heavy-duty booms and sticks. The stick is typically equipped with a ripper shank work tool. These machines are often used for ripping rock or tightly packed soil and can be found, for example, in road-building applications.

Standard Equipment: