6030/6030 FS Hydraulic Shovel

Get 0% for 60 months on Cat Compact Equipment Learn More

6030/6030 FS Hydraulic Shovel

360° Exterior View

We understand the challenges you face, the importance of reliability, and the relationship between uptime and productivity. That's why we continually strive to produce the safest, most reliable ...


Engine Output - SAE J1995
1140 kW (1,530 hp)
Standard Bucket Capacity
Face Shovel (heaped 2:1) - 16.5 m3 (21.6 yd3); Backhoe (heaped 1:1) - 17.0 m3 (22.2 yd3)
Operating Weight
Face Shovel - 294 tonnes (324 tons); Backhoe - 296 tonnes (326 tons)
Engine Output - SAE J1995 - 2 × Cat C27 ACERT

Automatic Lubrication System

Type (1)
Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
Capacity - Grease Container
120gal (US)
Type (2)
Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders
Type (3)
Lubricated pinion for greasing of internal gearing of swing ring
Type (4)
System failures displayed by Board Control System
Type (5)
Grease filters (200 ?m) between service station and container as well as directly behind grease pump


Net Power - SAE J1349
Gross Power - SAE J1995
Engine Model
2 × Cat® C27 ACERT™
Electric drive option available (1000 kW) on 6030 AC/6030 AC FS


Type (3)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
– Special liner material covering main wear areas inside and outside of bucket – Lip shrouds between teeth
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
– Automatic roll-back limiter to prevent material spillage – Kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
– Horizontal automatic constant-angle bucket guidance – Vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
– Constant boom momentum throughout the whole lift arc – Crowd force assistance
Type (1)
Catwalks with rails at booms
Type (2)
Special wear packages for highly abrasive materials on request
Type (4)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (5)
Booms and sticks are stress-relieved after welding
Type (6)
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
– Wing shrouds on side walls – Heel shrouds at bottom edges

Diesel Engines

Total Rated Net Power - SAE J1349
1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
Total Rated Gross Power - SAE J1995
1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
2 × Cat C27 ACERT
Fuel Tank Capacity
1339gal (US)
Meets U.S. EPA Tier 2 equivalent emission standards
Turbocharged and charge air-cooled
2 × 150A
Maximum Altitude - Without Deration - At 25° C (77° F) Above Sea Level
Number of Cylinders - Each Engine
Total Rated Net Power - ISO 3046/1
1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
Components (1)
Hydraulically driven radiator fan with electronically controlled fan speed
Components (2)
Micro processed engine management
Components (3)
Heavy-duty air filters
Components (4)
Two-stage fuel filter, including water separator
Components (5)
Additional high-capacity water separator

Electrical System - Diesel Drive

Components (1)
Battery isolation relays
Batteries in Series/Parallel Installation
4 × 210 Ah – 12V each; 420 Ah – 24V in total
System Voltage
Components (2)
Emergency stop switches accessible from ground level and in engine module
Components (3)
12 LED high-brightness working flood lights – 8 for working area – 2 for rear end
Components (4)
2 LED high-brightness access flood lights
Components (5)
14 LED service lights

Operating Weights

6030 - Standard Track Pads
6030 - Operating Weight
6030 - Ground Pressure
6030 FS - Ground Pressure
6030 FS - Operating Weight
6030 FS - Standard Track Pads
Other track pads available on request


Components (5)
Acoustic travel alarm
Bottom Rollers - Each Side
Components (1)
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
Components (2)
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
Components (3)
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Components (4)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Gradeability - Travel Drives - Approximate
Maximum Tractive Force
Parking Brakes
Wet multiple disc brake, spring loaded/hydraulically released
Support Rollers - Each Side
2 plus a skid plate in between
Track Pads - Each Side
Travel Drives - Each Side
1 planetary transmission with 2 two-stage axial piston motors
Travel Speed - 1st Stage - Maximum
Travel Speed - 2nd Stage - Maximum

Operator's Cab

Components (9)
Roller blinds at all windows
Components (2)
External sun shields at side and rear windows
Components (14)
Fold-away auxiliary seat with safety belt
Components (13)
Joystick controls integrated in independently adjustable seat consoles
Components (12)
FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
Components (1)
Under roof mounted heating ventilating and air conditioning system
Components (10)
Windshield with parallel intermittent wiper/washer
Components (11)
All-round safety glass, armored windshield and sliding side window
Components (3)
Robust instrument panel including large colored BCS screen with transflective technology
Components (4)
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
Components (5)
Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
Components (6)
Sliding emergency ladder (kick-down type) with ladder cage
Components (8)
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Components (7)
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Internal Dimensions of Cab - Height
Internal Dimensions of Cab - Length
Internal Dimensions of Cab - Width
Operator's Eye Level - Approximately

Electric Motor - 6030 AC/6030 AC FS

50 Hz (60 Hz on request)
1000 kW
Rated Current IN
109A (at 6.3 kV)
1,500 min-1 (1,800 min-1 at 60 Hz)
Starting current
450% of IN (253% of IN optional)
Squirrel cage induction motor
6.3 kV ± 10% (other on request)

Operating Specifications

Bucket Payload
Operating Weight - Backhoe
Operating Weight - Front Shovel

Retractable Service Station

Retractable service station installed underneath the engine module and easily accessible from ground.

Hydraulic Oil Cooling

Diameter - Fan
2 × 1220 mm (2 × 48 in)
Oil Flow of Cooling Pumps - AC Version
2 × 459 L/min (2 × 121 gal/min)
Oil Flow of Cooling Pumps - Diesel Version
2 × 467 L/min (2 × 123 gal/min)

Hydraulic System with Pump Managing System

Hydraulic Tank Capacity - Approximately
660gal (US)
Main Pumps
4 × variable swash plate pumps
Main Pumps - Maximum Oil Flow - AC Version
4 × 543 L/min (4 × 143 gal/min)
Main Pumps - Maximum Oil Flow - Diesel Version
4 × 552 L/min (4 × 146 gal/min)
Maximum Pressure - Attachment
Maximum Pressure - Swing Pumps
Maximum Pressure - Travel
Swing Pumps
2 × reversible swash plate double pumps
Swing Pumps - Maximum Oil Flow - AC Version
2 × 426 L/min (2 × 113 gal/min)
Swing Pumps - Maximum Oil Flow - Diesel Version
2 × 394 L/min (2 × 104 gal/min)
Total Volume of Hydraulic Oil - Approximately
925gal (US)


Bucket Capacity - Backhoe (heaped 1:1)
Bucket Capacity - Front Shovel (heaped 2:1)

Swing System

Maximum Swing Speed - AC Version
Maximum Swing Speed - Diesel Version
Parking Brakes
Wet multiple-disc brake, spring-loaded/hydraulically released
Swing Drive
2 compact planetary transmissions with axial piston motors
Swing Ring
Triple-race roller bearing with sealed internal gearing

Standard Equipment:

Optional Equipment:

    • Export crating
    • Custom paint
    • C27 ACERT engines meet U.S. EPA Tier 4 Interim equivalent emission standards
    • Oil change interval extension for engine oil up to 1,000 hours
    • Hydraulic service crane on superstructure with auxiliary engine
    • Round container for a standard 200 L (53 gal) grease barrel (instead of 450 L (119 gal) grease container)
    • Cold-weather package
    • Cab heating
    • Dual (redundancy) HVAC system
    • Camera monitoring system
    • Windshield guard (FOGS)
    • Track pad width 800 mm (2 ft 7 in) or 1200 mm (3 ft 11 in)
    • Cover plate under carbody (belly plate)