MD6200 Rotary Blasthole Drill Specifications

Specifications

Bit Load

Up to 16 964 kg (37,400 lb)

Hole Diameter

Up to 127-200 mm (5.0-7.87 in)

Engine

Cat® C18 @ 1,800 rpm

Basic Specs

U.S. EPA Tier 2 Equivalent - Engine

C18 @ 1,800 rpm

U.S. EPA Tier 2 Equivalent - Emissions

U.S. EPA Tier 2 equivalent

U.S. EPA Tier 4 Final - Engine

C18 @ 1,800 rpm

U.S. EPA Tier 4 Final - Emissions

U.S. EPA Tier 4 Final

Compressor - Rotary Drilling

32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi)

Angle Drilling Available

30° to –15° in 5° increments

Bit Load (single-Pass)

37400lb

Hoist Speed

4.3ft/s

Hole Diameter Range

127-200 mm (5.0-7.87 in)

Hole Depth Range - Single-Pass Depth

36ft

Compressor - DTH Drilling

29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi)

Pull-DownCapacity

Up to 15 876 kg (Up to 35,000 lb)

Hoist Capacity

Up to 11 907 kg (Up to 26,250 lb)

Hole Depth Range - Multi-Pass Depth

Down to 47.58 m (Down to 156 ft)

U.S. EPA Tier 4 Final - Power Rating (ISO 14396)

589HP

U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396)

587HP

Compressor Choices

DTH Drilling

Includes tool lubrication system

Rotary Drilling

Optional tool lubrication system

Note

With the compressor’s electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature.

DTH Drilling - 1050 cfm/350 psi

29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler

Rotary Drilling - 1150 cfm/125 psi

32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi)

Receiver Tank Choices

Choice (1)

Low pressure 8.6 bar (125 psi)

Choice (2)

High pressure 24.1 bar (350 psi)

Cooling

Components (1)

Coolers with easy cleaning access

Components (2)

All cooler core sections are replaceable

Components (3)

Functional in ambient temperature of up to 52° C (125° F)

Components (4)

Automatic variable speed fan control

Climate Choices

Climate Level 1 Standard Fluids and Lubricants (1)

Rated down to –1° C (30° F)

Climate Level 1 Standard Fluids and Lubricants (2)

Withstands high heat up to 52° C (125° F)

Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V

Rated down to –18° C (0° F)

Frame and Work Deck

Features (1)

Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life

Features (2)

Slip resistant surfaces

Features (3)

Fuel tank capacity 833 L (220 gal)

Components (1)

Three leveling jacks provide leveling on a 7° bench (any orientation)

Components (2)

Heavy duty tow hooks (non-drill end)

Components (3)

Four (4) lift lugs, for use with cables or chains

Frame Access Choices

Choice (1)

Fixed access steps to the cab area

Choice (2)

Small platform to the cab includes fixed access steps

Choice (3)

Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates

Drill Deck Misc.

Components (1)

Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket

Undercarriage

Model

Cat 336 Excavator type

Carrier Rollers

Three (3)

Triple Grousers (1)

600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure

Drawbar Pull

TBD

Components (1)

Track chain guards and guides

Lower rollers

Eight (8)

Travel Speed - High

2mile/h

Travel Speed - Low

1.3mile/h

Hydraulics

Components (1)

Two (2) main pumps – 85 cc (piston with proportional electronic controls)

Components (2)

One (1) auxiliary circuit pump – 45 cc (piston, load sensing)

Components (3)

One (1) fan pump – 45 cc (piston with proportional electronic controls)

Components (4)

One (1) charge pump – 73.8 cc (gear, fixed displacement)

Components (5)

Scheduled Oil Sampling (S·O·SSM) ports

Dimensions (Approximate)

Note

*For width with platform access to cab or service platform walkway contact the factory.

Width non-cab end

11.7ft

Body Length

31ft

Mast only length

52.1ft

Height mast down

11.75ft

Length mast down

57.5ft

Width cab end*

13.7ft

Height mast up

54.3ft

Tool Package Rotary

Components (7)

Drill tool lubricator (optional)

Components (1)

One-piece roller deck bushing

Components (2)

Pipe positioner clamps

Components (3)

Deck wrench

Components (4)

Bit sub

Components (5)

Top sub

Components (6)

Pipe wiper seal

Dust Control Choices

High Volume Water Injection - Maximum - Tank Above Deck - Capacity

200gal (US)

Water Injection - Tank Mounted Below Front Deck - Components

Water flow meter, volume control, tank fill level indicator

High Volume Water Injection - Maximum - Tank Below Deck - Capacity

200gal (US)

Water Injection - Tank Mounted Below Front Deck

200gal (US)

High Volume Water Injection - Maximum - Tanks Total Capacity

400gal (US)

Water Injection plus Dust Collector (1)

76.5 m³/min (2,700 ft³/min) dust collector; includes standard water injection

Water Injection plus Dust Collector (2)

Self-cleaning filters, dust chute clean-out door

Choices (1)

Static dust curtains, four sides boxed enclosed

Choices (2)

Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector)

Choices (3)

Tram off spray system (option)

Mast Packages

Single-Pass Depth

36ft

Multi-Pass Depth

Down to 47.58 m (Down to 156 ft)

Pulldown - Rated Single Cylinder Pull-Down/Hoist System

Up to 15 876 kg (Up to 35,000 lb)

Hoist

Up to 11 907 kg (Up to 26,250 lb)

Engine Features

Feature (3)

Tier 4 Final package complete with DEF/Engine Shutdown Control Package

Feature (1)

Dual starter motors

Feature (2)

Ether starting aid

Tool Package DTH

Components (8)

Top sub

Components (7)

Drill tool lubricator is included with selection of DTH Compressor

Components (1)

Two-piece bushing

Components (2)

Pipe positioner clamps

Components (3)

Deck wrench

Components (4)

Shock sub

Components (5)

Cross over subs

Components (6)

Pipe wiper seal

Drill Pipe

9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 2

4.5in

9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 1

4in

9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 5

6in

9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 4

5.5in

9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 3

5in

Mast and Pipe Carousel Features

Features (1)

Pipe carousel:
– Accepts quantity of four (4) 9.14 m (30 ft) pipes

Features (2)

Standard angle drilling package (0 to 30 degrees, in 5-degree increments)

Features (3)

Optional negative angle drilling package (0 to –15 degrees, in 5-degree increments) for a total range of (30 to –15 degrees)

Features (4)

Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in)

Features (5)

Drills strings configured for bit changes above deck

Features (6)

Single cylinder pulldown/hoist system

Features (7)

Sliding deck wrench assembly

Features (8)

Configured with roller deck bushing (for low pressure/tricone drilling)

Features (9)

Two-piece deck bushing (for high pressure DTH drilling)

Features (10)

Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating

Features (11)

Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in)

Features (12)

Closed circuit camera mounted in mast to view pipe carousel/top drive operation

Features (13)

Pipe positioner for angle drilling, multi-pass pipe handling

Features (14)

Manual pipe catcher – One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket

Rotary Head Top Drive System

Torque - Single Motor

6166lb/ft

Rotation Speed

0-150 rpm

Components (1)

Output shaft with box-end API-IF (NC46) 101 mm (4 in) thread

Components (2)

Rotary torque control

Components (3)

Virtual rotary head travel interlocks

Operator Environment

Cab Design

– FOPS cab has 1.9 m² (20.5 ft²) floor space
– Rubber shock-mounts absorb mechanical vibration
– Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) high-definition color screens

Cab Packages

– Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard
– Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller

Seating

– Seat swivels, locks and has two point retractable/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)

Windows

– Large windows front, rear and right cab side; full length drill window with guard
– Window shades (option)
– Windshield wiper with a common washer tank
– Manometer Pressure Gauge (option)

Lighting

– LED interior lights, backlit joysticks and keypads
– Flood lights for the drill perimeter; area spotlights
– Mast beacon and tram flashing strobe light (option)

HVAC

– Floor heating vent
– Filter access from deck, 500 hour service interval
– Defogging HVAC vents on main window

Cameras

– Three (3) CC cameras (front and left side) providing 360° vision coverage from operators seat; camera on the mast to view pipe carousel/top drive operation

Operating System Controls - Standard

Components (1)

Electric controls for drilling, tramming, leveling plus auxiliary functions

Components (2)

Rotary torque control

Components (3)

Virtual rotary head travel stops

Components (4)

Pipe positioner engaged/disengaged indicator

Components (5)

Drill depth meter

Components (6)

Drill performance and display system

Components (7)

Delayed engine shut down

Components (8)

Filter indicators for hydraulic, fuel, compressor and engine

Components (9)

Jack pressure sensors

Components (10)

Data logging of machine health with warnings and fault code records with export capability

Components (11)

Dust suppression control

Components (12)

Mast lock indicator

Components (13)

ECM proportional fan speed control system

Components (14)

Tram interlock, machine stability limits

Components (15)

Tram interlock, pipe in hole

Components (16)

Tram interlock, mast up and locked or down and parked

Components (17)

Tram interlock, jacks retracted

Components (18)

Tram interlock, winch parked

Components (19)

Cab environment controls (AC, heat, fan speeds)

Components (20)

Pre wired for Terrain and Autonomous Operation

Automation and Technology

Type (1)

Autonomous ready

Components (1)

Drill depth meter

Components (2)

Drill Assist (auto level, auto retract jacks, auto mast raise and lower, optional, single-pass auto drill)

Components (3)

Cat Terrain ready

Components (4)

Product Link Elite™

Safety and Security

Feature (1)

Approach angle of 15-degrees facilitates loading and unloading on a lowboy

Components (1)

Seven (7) emergency stop buttons

Components (2)

Hinged window guard over the full length of the front drill window

Components (3)

Conditional safety interlocks

Components (4)

Self-closing gates

Components (5)

Electric horn activated by push button in the cab

Components (6)

Automatic, audible tram alarm

Components (7)

Battery disconnect and starter switches can be locked out

Components (8)

Air hose retention devices

Components (9)

Slip resistant platform surfaces

Components (10)

Machine lifting provisions

Components (11)

FOPS Certified Operator Cab

Service Packages

Package (1)

Basic – Centralized manual lubrication for all pivot points, gravity fill for fuel and water

Package (2)

Standard – Automated lubrication system, fast fill for fuel and water (option)

Package (3)

Premium – Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option)

Weights

Working Weight Range

37 552-42 752 kg (82,789-94,253 lb)