Cat® D8T WH Waste Handler

Cat® D8T WH Waste Handler

From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of ...
PDF Print SHARE

Engine

Engine Model
Cat C15 ACERT™
Flywheel Power
335HP
Bore
5.4in
Stroke
6.75in
Displacement
928in³
Net Power - Maximum - ISO 9249/SAE J1349 at 1,700 rpm
335HP
Net Power - Maximum - ISO 9249/SAE J1349 DIN at 1,700 rpm
343HP
Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN)
317HP
Net Power - 1,900 rpm - ISO 9249/SAE J1349
312HP
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (1)
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
Note (3)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
Emissions
Tier 4 Final/Stage IV/Korea Tier 4

Weights

Operating Weight
86710lb

Dimensions - Standard

Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
183in
Height - Top of Roof-Mounted Precleaner
145.2in
Height - Grouser
3.1in
Without Trunnions - Standard Shoe Width
106in
Width - Tractor - Over Trunnions
120.4in
Track Gauge
82in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Machine Height - Grouser Tip - Length of Track on Ground
126.2in
Machine Height - Grouser Tip - Ground Clearance
24.1in
Machine Height - Grouser Tip - Exhaust Stack
136.7in
Machine Height - Grouser Tip - EROPS (Top of Railing)
140.4in
Length - Basic Tractor - With Striker Bars with Two Counterweights*
206.4in

Dimensions - Non-Suspended

Without Trunnions - Standard Shoe Width
106in
Width - Tractor - Over Trunnions
120.4in
Track Gauge
82in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Machine Height - Grouser Tip - Length of Track on Ground
128.3in
Machine Height - Grouser Tip - Ground Clearance
23.8in
Machine Height - Grouser Tip - Exhaust Stack
136.3in
Machine Height - Grouser Tip - EROPS (Top of Railing)
140.7in
Length - Basic Tractor - With Striker Bars with Two Counterweights*
206.4in
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
183in
Height - Top of Roof-Mounted Precleaner
145.2in
Height - Grouser
3.1in

Dimensions - LGP

Width - Tractor - Over Trunnions
130.4in
Track Gauge
92in
Length - Basic Tractor - With Striker Bars with Two Counterweights*
206.4in
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
183in
Height - Top of Roof-Mounted Precleaner
145.2in
Height - Grouser
3.1in
Without Trunnions - Standard Shoe Width
130in
Machine Height - Grouser Tip - Exhaust Stack
129.7in
Machine Height - Grouser Tip - EROPS (Top of Railing)
140.4in
Machine Height - Grouser Tip - Length of Track on Ground
126.2in
Machine Height - Grouser Tip - Ground Clearance
24.1in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Operating Weights

Standard Waste Handler
86710lb
LGP Waste Handler
91600lb

Shipping Weight

Standard Waste Handler
73400lb
LGP Waste Handler
77900lb

Blades - Capacity (SAE J1265)

8 U Landfill
27.7yd³
8 SU Landfill
25.6yd³
8 SU LGP Landfill
28.9yd³

Transmission

3 Reverse
8.8mile/h
2 Forward
3.8mile/h
2 Reverse
5mile/h
3 Forward
6.6mile/h
1 Reverse
2.8mile/h
1 Forward
2.1mile/h

Blades - Width - Over End Bits

8 U Landfill
13.9ft
8 SU Landfill
12.9ft
8 SU LGP Landfill
14.9ft

Durability

  • Specialized guarding throughout the machine helps protect major components like the chassis, fuel tank and hydraulic tank from impact and airborne debris.
  • Final drive guarding helps prevent wire wrap and helps keep dirt and debris away from the Duo-Cone™ seals.
  • Pivot shaft seal guards help prevent debris from entering and damaging seals.
  • Striker bars help prevent debris from damaging the machine, and added seals help reduce the amount of material entering engine and transmission compartments.
  • Rotating bushings on tilt cylinders helps wrapping material to roll off hoses.
  • Heavy duty hinged radiator guard protects radiator and fan from penetration by material coming straight in or from under the blade.
  • Cooling system designed for high debris environments, with automatic reversing fan and swing-out access for cleanout with an air wand.
  • Laminated thermal shields and insulated Clean Emissions Module.
  • Hinged belly guard for easy cleaning.
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.
  • Lights mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.

Ease of Operation

  • Comfortable, quiet operator station with excellent visibility and air handling features to help keep dust out/provide air filtration.
  • Enhanced AutoShift allows your operator to select optimum ground speed for the job and helps save fuel by automatically choosing the more efficient gear based on load.
  • Low effort, responsive controls for precision and ease of operation.
  • Selectable electro-hydraulic maps let you set implement response to match operator preferences and application.
  • Rear vision camera available to enhance visibility behind the machine.
  • Meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 emission standards with emissions technology that is transparent – no action required from the operator, no stopping for regeneration.

Technology

  • Cat Slope Indicate (Standard) shows cross slope and mainfall on the primary machine display to help operators work more confidently.
  • Cat GRADE with 3D (Optional) is an integrated grade control system that helps operators grade with more accuracy and efficiency. Antennas mount on top of the cab – not on the blade – so they are safely out of the way of landfill debris.
  • Cat AccuGrade™ (Optional) is a dealer-installed aftermarket grade-control system that provides increased grading versatility and the ability to scale capacity to changing needs, providing a choice of lasers for 2D flat-plane and slope work, Global Navigation Satellite System (GNSS) control for complex 3D cuts and contours, and/or systems using a Universal Total Station (UTS) for fine and finish grading.
  • Cat AccuGrade Ready Option (ARO) (Optional) allows you to easily install or upgrade to Cat AccuGrade 2D and 3D grade-control systems to add versatility and resale value to your machine.
  • Remote monitoring with Product Link™*/VisionLink® helps you manage your fleet more effectively and profitably.

*Product Link not available in all areas. Please consult your Cat dealer for details.

Standard Equipment: