CCS9 Smooth Drum Combination Vibratory Compactor
Weights
- Operating Weight - With ROPS/FOPS
- 19842lb
- Weight - Drum with ROPS/FOPS
- 9325lb
- Operating Weight - With Cab
- 20580lb
- Weight - Drum with Cab
- 11554lb
Operating Specifications
- Standard Compaction Width
- 84in
- Turning Radius - Inside Drum Edge
- 12.1ft
- Ground Clearance
- 15in
- Travel Speed - Maximum
- 6mile/h
- Static Linear Load - With Cab
- 138lb/in
- Static Linear Load - With ROPS/FOPS
- 132lb/in
Engine
- Gross Power
- 131HP
- Engine Model
- Cat C4.4 with ACERT
Service Refill Capacities
- Fuel Tank Capacity
- 40gal (US)
- Wheel Spray Tank
- 4gal (US)
- Water Spray Tank Capacity
- 132gal (US)
Dimensions
- Overall Length
- 18.7ft
- Wheel Base
- 9.58ft
- Overall Width
- 7.58ft
- Drum Width
- 84in
- Drum Diameter
- 51in
- Height - With ROPS/FOPS or Cab
- 9.9ft
Vibratory System
- Nominal Amplitude - Low
- 0.014in
- Nominal Amplitude - High
- 0.04in
- Centrifugal Force - Maximum
- 31023lb
- Centrifugal Force - Minimum
- 12409lb
- Vibratory Frequency - Standard
- 2520V/m
Exceptional Visibility and Control
- Finger Tip Control
Touch pad machine functions enable the operator to fine tune engine speed control, travel speed, and water spray intervals for efficient operation.
- Intuitive LCD Display
Easily monitor machine operating conditions including; travel speed, vibrations per minute, fuel level, operating temperature, and machine diagnostics. The display is backlit for easy viewing in various lighting conditions.
Smooth and Quiet
- Cat C4.4 Diesel Engine with ACERT™ Technology
The Cat C4.4 engine with ACERT™ technology offers enhanced efficiency, better serviceability, ample power, and less noise. It utilizes the building blocks of ACERT technology in order to meet emission standards. This innovative combination yields cleaner combustion and delivers steady power in all operating conditions with optimal fuel efficiency.
- Eco-mode
Eco-mode helps to economize the use of fuel. When the machine idles for a predetermined amount of time, Eco-mode is engaged and the engine rpm is lowered. When the propel lever is engaged, higher engine speeds resume. For certain applications, Eco-mode can be engaged to operate the engine at lower rpm than normal. The lower engine speed results in less fuel burn. Eco-mode can also be programmed to shut down the engine after a user-defined amount of time.
- Automatic Speed Control
Automatic Speed Control is a feature that allows the operator to select a maximum working speed. Once selected, the speed can consistently be reached by engaging the propel lever to the full stroke. Consistent speed contributes to compaction quality by making it easier to maintain compaction uniformity.
Optimize Compaction
- Simple Operation
The five amplitude, single frrequency vibratory system can be tailored to match a variety of lift thicknesses and mix types. Simple hand wheel adjustments make fine tuning the compaction process easy.
- Optional Temperature Sensors
Optional Infra-red sensors enable operators to easily monitor surface temperatures to help determine when to begin and when to end the compaction process. The upper temperature limit for compaction is about 160 degrees C (320 degrees F), while the lower limit is about 90 degrees C (190 degrees F).
- Automatic Vibratory Control
An auto-vibe function is tailored to activate or deactivate the vibratory system based on the propel lever position in order to prevent over compaction when making starts and stops.
Industry Leading Water Spray System
- Capacity and Convenience
The water tank capacity for the drum is 400 L (88 gal), while the wheel spray tank capacity is 18 L (4 gal). Dual pumps alternate with the direction of travel in order to optimize the service life of each pump. An optional freeze protection kit is avalailable for cold climates when the machine is not in use.
- High Flow Design
Dual spray bars and evenly spaced nozzles help ensure that the drum stays wet, even in the harshest conditions.
- Reliable Performance
Triple filtration with filters located in the tank fill port, before the water pump and in the spray nozzles help provide reliable performance.
Best Life-Time Value
- Long Service Intervals
Long service intervals contribute to more productivity and lower owning and operating costs. The vibratory system scheduled oil change interval is 3 years/3,000 hours. The hydraulic oil service interval is 3,000 hours. Engine oil service is every 500 hours.
- Tilting Cooling System
The cooling system tilts for easy cleaning. Normal cleaning ensures that the cooling systems protects the engine to full capacity.