CCS7 Smooth Drum Vibratory Combination Compactor

CCS7 Smooth Drum Vibratory Combination Compactor

The CCS7 is a 7 metric ton vibratory combination compactor that combines the smooth front drum of a soil compactor, with smooth rear tires similar to a pneumatic ...
PDF Print SHARE

Weights

Operating Weight - With ROPS/FOPS Canopy
16320lb
Operating Weight - With Cab
16907lb
Weight - Drum with Cab
9621lb
Weight - Drum with ROPS/FOPS Canopy
9325lb

Operating Specifications

Standard Compaction Width
67in
Turning Radius - Inside Drum Edge
10ft
Ground Clearance
16in
Travel Speed - Maximum
7mile/h
Static Linear Load - With Cab
145lb/in
Static Linear Load - With ROPS/FOPS
141lb/in

Engine

Gross Power
100.6HP
Engine Model
Cat C3.4B with ACERT

Service Refill Capacities

Fuel Tank Capacity
40gal (US)
Water Spray Tank
104gal (US)
Wheel Spray Tank
4gal (US)

Dimensions

Overall Length
16.8ft
Wheel Base
8.5ft
Overall Width
5.9ft
Drum Width
84in
Drum Diameter
48in
Height - With ROPS/FOPS or Cab
9.2ft

Vibratory System

Nominal Amplitude - Low
0.014in
Nominal Amplitude - High
0.036in
Centrifugal Force - Maximum
28101lb
Centrifugal Force - Minimum
11240lb
Vibratory Frequency - Standard
2520V/m

Exceptional Visibility and Control

Finger Tip Control

Touch pad machine functions enable the operator to fine tune engine speed control, travel speed, and water spray intervals for efficient operation.

Intuitive LCD Display

Easily monitor machine operating conditions including; travel speed, vibrations per minute, fuel level, operating temperature, and machine diagnostics. The display is backlit for easy viewing in various lighting conditions.

Smooth and Quiet

Cat C3.4B Engine with ACERT™ Technology

The Cat C3.4B engine with ACERT™ technology offers enhanced efficiency, better serviceability, ample power, and low sound levels. It provides 75 kW (100 hp) of power and utilizes the building blocks of ACERT technology in order to meet emission standards. This innovative combination yields cleaner combustion and delivers steady power in all operating conditions with optimal fuel efficiency.

Eco-mode

Eco-mode helps to economize the use of fuel. When the machine idles for a predetermined amount of time, Eco-mode is engaged and the engine rpm is lowered. When the propel lever is engaged, higher engine speeds resume. For certain applications, Eco-mode can be engaged to operate the engine at lower rpm than normal. The lower engine speed results in less fuel burn. Eco-mode can also be programmed to shut down the engine after a user-defined amount of time.

Automatic Speed Control

Automatic Speed Control is a feature that allows the operator to select a maximum working speed. Once selected, the speed can consistently be reached by engaging the propel lever to the full stroke. Consistent speed contributes to compaction quality by making it easier to maintain compaction uniformity.

Optimize Compaction

Simple Operation

A single switch enables the operator to choose between two amplitudes for easy thin lift or thick lift operation. The thick lift setting delivers an amplitude of 0.92 mm (0.036 in), while the thin lift setting delivers 0.37 mm (0.014 in).

Optional Temperature Sensors

Optional Infra-red sensors enable operators to easily monitor surface temperatures to help determine when to begin and when to end the compaction process. The upper temperature limit for compaction is about 160 degrees C (320 degrees F), while the lower limit is about 90 degrees C (190 degrees F).

Automatic Vibratory Control

An auto-vibe function is tailored to activate or deactivate the vibratory system based on the propel lever position in order to prevent over compaction when making starts and stops.

Industry-Leading Water Spray System

Capacity and Convenience

The water tank capacity for the drum is 400 L (88 gal), while the wheel spray tank capacity is 18 L (4 gal). Dual pumps alternate with the direction of travel in order to optimize the service life of each pump.

High Flow Design

Dual spray bars and evenly spaced nozzles help ensure that the drum stays wet, even in the harshest conditions.

Reliable Performance

Triple filtration with filters located in the tank fill port, before the water pump and in the spray nozzles help provide reliable performance.

Best Life-Time Value

Long Service Intervals

Long service intervals contribute to more productivity and lower owning and operating costs. The vibratory system scheduled oil change interval is 3 years/3,000 hours. The hydraulic oil service interval is 3,000 hours. Engine oil service is every 500 hours.

Tilting Cooling System

The cooling system tilts for easy cleaning. Normal cleaning ensures that the cooling systems protects the engine to full capacity.

Standard Equipment: