CB44B Tandem Vibratory Roller (Solid Drum)

CB44B Tandem Vibratory Roller (Solid Drum)

The Cat® CB44B is a 8 ton roller with 1500 mm (59") tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other ...
PDF Print SHARE

Weights

Operating Weight
18056lb
Operating Weight - At Rear Drum with ROPS/FOPS
8907lb
Operating Weight - At Front Drum with ROPS/FOPS
8708lb
Operating Weight - With Cab
18056lb
Operating Weight - With ROPS/FOPS
17615lb
Maximum Weight at Front Drum
9149lb
Maximum Weight at Rear Drum
8907lb

Operating Specifications

Standard Compaction Width
59in
Curb Clearance
35in
Turning Radius - Inside Drum Edge
14.6ft
Ground Clearance
9in
Static Linear Load
155lb/in
Travel Speed - Maximum
7.5mile/h
Maximum Compaction Width
65in

Engine

Gross Power
102HP
Bore
3.89in
Stroke
4.33in
Engine Model
Cat® C3.4B with ACERT Technology

Service Refill Capacities

Fuel Tank Capacity
55gal (US)
Water Spray Tank Capacity
196gal (US)

Vibratory System

Drum Width
59in
Drum Diameter
44in
Frequency
3200V/m
Vibration Selection
Independent per drum, front only, rear only, both
Eccentric Weight Drive
Hydraulic direct, auto reversing
Nominal Amplitude - Low
0.01in
Nominal Amplitude - High
0.025in
Centrifugal Force per Drum - Maximum
17310lb
Centrifugal Force per Drum - Minimum
6744lb

Dimensions

Overall Length
177in
Wheel Base
130in
Height - With ROPS/FOPS
117in
Compaction Width
59in
Overall Width
65in
Drum Width
59in
Drum Diameter
43in

Exceptional Visibility and Control

Comfortable Operating Station

The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.

Fingertip Control

The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.

LCD Display

The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.

Convenient Console

The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.

Vibratory System Choices

Solid Drum Design

Solid drum models offer more vibratory choices to match your amplitude and frequency requirements. They perform particularly well in high-production applications. They provide high amplitudes for breakdown and intermediate work, while their high static linear loads deliver excellent results for finishing work.

Performance Features

The vibratory systems offer multiple options that help fine-tune performance on thick challenging lifts. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.

Five Amplitude Vibratory System

The five amplitude system is a heavy hitter for thick lifts and tough mix designs. It utilizes a single frequency and five amplitudes that can easily be fine-tuned to match application requirements.

Dual Amplitude/Dual Frequency Vibratory System

The dual amplitude, dual frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.

Cat® Compaction Control

Temperature Sensors

Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-Count Mapping

Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature Mapping

Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

Smooth Operating Powertrain

Cat® C3.4B Engine

The C3.4B engine provides 75 kW (102 hp) of power and meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).

High Capacity Cooling System

The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. The high capacity fans direct warm air away from the operator for a more comfortable operating environment.

Standard Equipment: