CB14B Utility Roller

CB14B Utility Roller

360° Exterior View

The CB14B is a 1.5 ton utility roller with 900 mm (35”) tandem vibratory drums.

PDF Print SHARE

Weights

Operating Weight
3274lb
Maximum Weight at Front Drum
1631lb
Maximum Weight at Rear Drum
1642lb

Operating Specifications

Standard Compaction Width
35in
Curb Clearance
16in
Ground Clearance
9in
Static Linear Load
46.9lb/in
Travel Speed - Maximum
6mile/h

Engine

Gross Power
22.5HP
Engine Model
Kohler KDW1003

Service Refill Capacities

Fuel Tank Capacity
6.1gal (US)
Water Spray Tank Capacity
26.4gal (US)

Vibratory System

Frequency
4200V/m
Nominal Amplitude - High
0.018in
Centrifugal Force per Drum - Maximum
3400lb

Dimensions

Overall Length
77in
Overall Width
39in
Maximum Machine Height
100in
Drum Width
35in
Drum Diameter
22in

Comfort and Control

Roomy Operating Station

The roomy operating station with abundant leg room and standard, adjustable seat improves visibility. The seat is equipped with an operator presence sensor for enhanced safety and water drainage capability.

Instrument Panel

The controls are centrally located for operator ease and safety. Key controls such as drum vibe selection, water spray on/off and intermittent settings are logically placed and easy to adjust. The easily observed warning lights provide quick feedback to the operator.

Visibility

The sloped engine hood enables excellent forward visibility and minimal side clearance creates direct sight lines to working areas.

Smooth, Efficient Powertrain

Powerful Engine

The Kohler KDW1003 4-cycle, 3-cylinder liquid cooled diesel engine delivers 16.8 kW (22.5 hp) of power @ 2850 rpm. It meets U.S. EPA Tier 4 Final engine emissions standards, has a pre-heat starting system, and is serviced and supported by Cat® Dealers.

Cooling System

The cooling system with integrated water and oil cooler utilizes an aluminum radiator that provides corrosion resistance and reliability. Large space between cores provide efficient cooling and easy cleaning. The system is effective in high-ambient temperatures up to 50º C (122º F).

Maneuverability and Transport

Size and Steering

The articulated frame with sealed articulation bearings has a low center of gravity that provides optimum stability on asphalt or soil/aggregate.

Transportability

The foldable ROPS facilitates machine transportability and can be folded forward without the use of tools. The short machine length allows it to fit crosswise on a trailer, while high ground clearance facilitates driving up trailer ramps. The machine is equipped with four lifting points for attaching an optional spreader bar.

Perfectly Matched

Vibratory System and Drums

The CB14B utilizes 900 mm (35") tandem vibratory drums. Vibratory selection includes front drum only or both drums for versatility on the job site. The system automatically starts when the propel lever is engaged.

Dual Drum Drive Powertrain

The dual-drum drive powertrain provides continuous full-drum traction on soft base materials, uneven surfaces and steeper grades. The rounded drum edge prevents cutting into mat for better mat quality.

Consistent Water Spray Coverage

Pressurized System

The standard 100 L (26 gal) tank maximizes time between refills. Eight intermittent spray settings optimize usage, while four nozzles at rear and front of each drum evenly distributes water coverage.

Easy Service

The system is equipped with corrosion-proof materials that are easy to clean. The spray bars and spray nozzles can be removed by hand, without the use of tools. The system is double-filtered system to help prevent clogging and a single drain port simplifies clean-out.

Serviceability

Easy Component Access

The engine hood and operating platform are equipped with lift assist for quick access and servicing. The battery and water pump are easy to reach with the operator platform in the raised position. External engine components, hydraulics and routine service points are grouped for simplified access and ecology-minded draining.

Effortless Maintenance

Large space between radiator and oil cooler core provide easy cleaning. The fuel and water tanks are also conveniently located for fast cleaning. The electrical system utilizes color-coded wires, all-weather connections and nylon braiding to provide reliability and protection.

Standard Equipment: