CB10 Tandem Vibratory Roller

CB10 Tandem Vibratory Roller

360° Exterior View

The Cat® CB10 Split Drum is a 10 ton roller with 1700 mm (67") tandem vibratory drums. It excels on a variety of asphalt mix designs as well ...


Operating Weight
Standard Operating Weight with ROPS
Standard Operating Weight with Cab
Maximum Operating Weight with ROPS
Maximum Operating Weight with Cab

Operating Specifications

Standard Compaction Width
Travel Speed - Maximum
Static Linear Load
Maximum Compaction Width


Gross Power
Engine Model
Cat C4.4 with ACERT Technology

Service Refill Capacities

Fuel Tank Capacity
55gal (US)
Water Spray Tank Capacity
221gal (US)

Vibratory System

Drum Width
Vibration Selection
Independent per drum, front only, rear only, both
Nominal Amplitude - Low
Nominal Amplitude - High
Centrifugal Force per Drum - Maximum
Centrifugal Force per Drum - Minimum


Overall Length
Wheel Base
Height - With ROPS/FOPS
Overall Width
Drum Diameter

Exceptional Visibility and Control

Comfortable Operating Station

The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle, wide-width seat belt, cup holders and a lockable storage compartment.

Fingertip Control

The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.

LCD Display

The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in the same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.

Convenient Console

The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.

Vibratory System Versatility

Auto Adjustable Compaction

AAC optimizes compaction effort based on the response received from the asphalt and sub-base layers. Each drum is equipped with a dedicated accelerometer and ECM that delivers quick calculations to help determine the ideal amplitude to maximize compaction performance. The system has a fast, 4 second response time from the minimum to maximum amplitude that helps ensure even compaction.

Two Amplitude and Two Frequency Vibratory System

The two amplitude and two frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.

Performance Features

The vibratory systems offer multiple options that help fine-tune performance on thick challenging lifts. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.

Cat Compaction Control

Temperature Sensors

Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-Count Mapping

Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature Mapping

Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

Machine to Machine Communication

Machine to Machine Communication improves worksite efficiency by allowing operators to monitor fleet patterns. The system allows operators to monitor rolling patterns of other machine and pickup where they left off. It also simplifies night-time operation when lighting conditions make it difficult to see after the first pass.

Smooth Operating Powertrain

Cat C4.4 Engine

The C4.4 engine provides 98 kW (131 hp) of power and meets emissions equivalent to U.S. EPA Tier 4 Interim and EU Stage IIIB emission requirements. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service.

High Capacity Cooling System

The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. The high capacity fan directs warm air away from the operator for a more comfortable operating environment.

Standard Equipment:

Optional Equipment:

    Auto-Adjustable Compaction
    Air Conditioning
    Air Suspension Seat w/heat
    Bio-Degradeable Oil
    Cat Compaction Control
    Compaction Meter Value
    Edge Cutter
    Freeze Protection Kit (Water Spray)
    Halogen Lights with Drum Edge Lighting
    High Ambient Cooling System
    High Intensity Discharge Lights
    LED Lights
    Machine to Machine Communication
    Product Link
    Roading Lights
    Recording Module
    Temperature Gauge
    Two Amplitude, Two Frequency Vibratory System
    Warning Beacon
    Water Distribution Mats
    Versa Vibe Vibratory System