816K Landfill Compactor

816K Landfill Compactor

360° Exterior View

Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate ...
PDF Print SHARE

Weights

Operating Weight
56899lb

Engine

Gross Power
284HP
Net Power
248HP
Engine Model
Cat® C7.1 ACERT™: configured for two emissions options
Torque Rise
52%
Bore
4.1in
Stroke
5.3in
Displacement
427.8in³
Low Idle Speed
800r/min
High Idle Speed
2270r/min
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
Rated Power (SAE J1349) - Tier 4 Final/Stage IV
248HP
Rated Power (Net ISO 9249) - Tier 4 Final/Stage IV
248HP
Gross Power - SAE J1995 - Tier 4 Final/Stage IV
284HP
Gross Power - ISO 14396 - Tier 4 Final/Stage IV
274HP
Maximum Net Torque - 1,400 rpm - Tier 4 Final/Stage IV
899lb/ft
Rated Power (SAE J1349) - Tier 3/Stage IIIA Equivalent
249HP
Rated Power (Net ISO 9249) - Tier 3/Stage IIIA equivalent
249HP
Gross Power - SAE J1995 - Tier 3/Stage IIIA Equivalent
286HP
Gross Power - ISO 14396 - Tier 3/Stage IIIA Equivalent
275HP
Maximum Net Torque - 1,400 rpm - Tier 3/Stage IIIA Equivalent
749lb/ft
Maximum Altitude - Without Derating
9842.52ft

Axles

Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°

Dimensions (Approximate)

Height - Top of Exhaust Pipe
11.5ft
Height - Top of Hood
8.9ft
Ground Clearance - Bumper
2.7ft
Hitch to Centerline of Front Axle
5.5ft
Wheel Base
11ft
Width - Over Wheels
131.4ft
Height - Top of Beacon
14.3ft
Centerline of Rear Axle to Bumper
6.5ft
Overall Length - Maximum
26.4ft
Height - Cab Roof
12.7ft
Inside Turn Radius - Wheels
8.9ft
Inside Turn Radius - Blade
9.5ft
Outside Turning Radius - Blade
21.2ft
Ground Clearance
1.7ft

Service Refill Capacities

Note
All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for the EPA, 10 ppm for the EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (
Transmission
14.8gal (US)
Fuel Tank
132.1gal (US)
Engine Crankcase
5.28gal (US)
Cooling System - Tier 4 Final/Stage IV
21.4gal (US)
Differential - Final Drives - Front
11.4gal (US)
Differential - Final Drives - Rear
11.4gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only)
4.2gal (US)
Hydraulic Tank Only
19.8gal (US)
Cooling System - Tier 3/Stage IIIA Equivalent
19.3gal (US)

Brakes

Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released

Transmission

Transmission Type
Planetary – Powershift – ECPC
Travel Speeds - Forward - First
3.8mile/h
Travel Speeds - Forward - Second
6.8mile/h
Travel Speeds - Reverse - First
4.3mile/h
Travel Speeds - Reverse - Second
7.8mile/h

Hydraulic System

Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 915 mm (4.7 in × 36.0 in)
Main Relief Pressure
3190psi
Maximum Supply Pressure
2930psi
Pump Flow at 2,111 rpm
23.5gal/min

Operating Specifications

Maximum Operating Weight (Tier 4 Final/Stage IV)
56899lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
56308lb

Cab - Standard

Operator Sound Level - ISO 6396
71dB(A)
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV
111dB(A)
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent
112dB(A)

Hydraulic System - Steering

Bore
4in
Maximum System Flow
147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Steering Pressure Limited
4003psi
Steering System - Circuit
Closed Center Load Sensing
Steering System - Pump
Piston – Variable Displacement
Stroke
23.5in
Vehicle Articulation Angle
84°

Cab - Suppression

Operator Sound Level - ISO 6396
70dB(A)
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV
109dB(A)
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent
110dB(A)

Blades

Width - Moldboard Length
11.75ft
Height - Including Cutting Edge and Screen
6.4ft
Maximum Depth of Cut
1.2ft
Maximum Lift Above Ground
3.7ft
Width - Over End Bits
12ft

Wheels

Paddle Tips - Weight (Group)
13126lb
Paddle Tips - Outside Diameter
67.6in
Paddle Tips - Drum Diameter
55.1in
Paddle Tips - Drum Width
40in
Paddle Tips - Tips per Row
5
Paddle Tips - Tips per Wheel
20
Paddle Tips - Replaceable
Welded
Paddle Tips - Width over Drums
131.4in
Paddle Tips - Tip Height
6.25in
Plus Tips - Weight (Group)
13982lb
Plus Tips - Outside Diameter
67.6in
Plus Tips - Drum Diameter
55.1in
Plus Tips - Drum Width
40in
Plus Tips - Tips per Row
5
Plus Tips - Tips per Wheel
20
Plus Tips - Replaceable
Welded
Plus Tips - Width over Drums
131.4in
Plus Tips - Tip Height
6.25in
Combo Wheels - Weight (Group)
13554lb
Combo Wheels - Outside Diameter
67.6in
Combo Wheels - Drum Diameter
55.1in
Combo Wheels - Drum Width
40in
Combo Wheels - Tips per Row
5
Combo Wheels - Tips per Wheel
20
Combo Wheels - Replaceable
Welded
Combo Wheels - Width over Drums
131.4in
Combo Wheels - Tip Height
6.25in

POWERFUL EFFICIENCY

  • Advanced Productivity Electronic Control System (APECS) delivers improved transmission shifting performance and a higher level of comfort for operators.
  • Decelerator pedal acts as a brake, transmission neutralizer and an engine decelerator to override the engine speed selected by the throttle lock. Allows the operator to slow speeds when the throttle lock is engaged and to return to throttle lock without pressing a resume or set button.
  • Electro hydraulic controls increase productivity with responsive implements feature. Operate comfortably with easy-to-use soft-detent controls.
  • Steering System provides confident machine operation and precise control enabled by the 815K's load sensing hydraulic steering system.
  • Increased efficiency with variable displacement piston pumps that give operators precise positioning for easy maneuvering in tight areas with 42 degree articulation in each direction.
  • Steering and Transmission Integrated Control System (STIC™) enhances operator comfort by integrating steering and transmission control functions in a single lever. Includes finger-controlled gear selection.

LONG TERM VALUE AND DURABILITY

  • Designed and made with purpose-built structures to remain safe and durable for the long run.
  • Long-life-designs, materials and robotic welding ensure multiple life cycles and ability to withstand the toughest conditions.
  • Full box-section rear frame resists torsional shock and twisting forces.
  • Heavy-duty steering-cylinder mounts efficiently conduct steering loads into the frame.

PERFORMANCE WITH LESS FUEL

  • Advanced Productivity Electronic Control System (APECS) delivers consistent, smooth shifting and efficiency through integrated electronic controls.
  • Strategic use of metallurgy and heat treating ensures long-life gears.
  • The Cat C7.1 engine is designed for maximum fuel efficiency and increased power density.
  • Two engine options are available to meet Tier 4 Final/Stage IV or Tier 3/Stage IIIA equivalent emission standards. (depending upon market).
  • Engine features innovative Cat electronics, fuel injection process, air-management systems, aftertreatment solution with Cat selective catalytic reduction.
  • Integrated systems intelligently lower working engine speeds and reduce overall system heat loads resulting in improved performance and fuel efficiency.
  • Next generation fuel injection systems control fuel metering through a series of carefully timed microbursts providing cleaner combustion and the most efficient fuel burn.

WHEEL TIPS BUILT TO PERFORM

  • New long-life Paddle and Plus design tip options.
  • Up to 40% longer life.
  • Purpose designed for Cat Landfill Compactors.
  • Improved machine performance.
  • Improved traction.
  • Select Paddle Tip for traction and fuel economy.
  • Select Plus Tip for increased side-slope stability.
  • Select combination of both to optimize performance in your conditions.

OPERATOR COMFORT AND CONTROL

  • Pressurized cab sits on isolation mounts improving comfort and reducing sound.
  • Cab features a convenient floor storage tray/lunch box.
  • Cat Comfort Series III Seat includes mid-back design, thick, contoured cushions, air suspension, six-way adjustments, and a seat-mounted implement pod and STIC steer that moves with the seat for optimal control.
  • Control Panel gives operators the information and controls for safer and time-saving settings.
  • STIC control simplicity provides maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.

PRODUCTIVITY WITH TECHNOLOGY

  • Cat Compaction Control system uses Machine Drive Power (MDP) technology to measure rolling resistance and correlates it with landfill compaction. 3D mapping indicates where to work and when layers are at optimum density. The system eliminates voids, optimizes cell space and documents results.
  • VisionLink 3D Project Monitoring provides managers with detailed compaction analysis to more effectively monitor and manage operations.
  • DETECT technologies help keep people and equipment safe by keeping operator aware of the work area and by monitoring and reporting unsafe conditions like avoidance zones.
  • COMPACT technologies combine advanced compaction measurement, in-cab guidance and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and with fewer passes.
  • Product Link is deeply integrated into your machine, giving you access to information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface. Helps effectively manage fleet and lower operating costs.

BUILT-IN SAFETY FEATURES

  • Railings, ladders and non-slip surfaces enhance technician and operator safety.
  • Rearview camera with in-cab monitor increases operator awareness around the machine.
  • Reduced vibrations to the operator with isolated cab mounts and seat mounted implement and steering controls.
  • Low interior sound levels.
  • Pressurized cab with filtered air.
  • Engine and power train guards prevent trash build-up and shield components.
  • Front frame guards prevent trash build-up inside the frame and protects components and hydraulic lines.
  • Axle wrapping and seal guarding prevents material from wrapping and binding around the axles and assists when cleaning is needed.
  • Transmission oil tube is guarded to resist damage from debris.
  • The fuel tank is positioned away from the debris in the front frame and is easily accessed.
  • High radiator air inlet with screen helps prevent trash from entering the radiator area, maintaining proper airflow and aiding debris to fall off.
  • Striker bars and optional cleaner fingers are located in front and behind the rear wheels and behind the front wheels. Striker bars help to keep wheels free of debris to assist the wheel tips in maintaining good compaction.
  • In cohesive material or severe packing conditions, optional cleaner fingers are available to further assist in keeping the wheel tips clean.
  • Roof extends past the cab doors and windows to minimize debris build up.
  • Suction fan allows ambient air to cool, enhancing cooling capacity. It also pressurizes the engine compartment, preventing trash build up.

REDUCE ENVIRONMENTAL IMPACT

  • Engine Idle Shutdown saves fuel by avoiding unnecessary idling.
  • Reduce waste to the environment with maintenance-free batteries.
  • To assist with maximizing machine life, the Cat 816K is built for multiple lives and is one of our most rebuilt products. To get the most value from your investment, Caterpillar offers sustainable options including Cat Reman and Certified Rebuild programs. With these programs, remanufactured components deliver cost savings of 40 to 70 percent, lowering operating costs while also reducing waste and minimizing the need for raw materials.

TOP-TIER SERVICE AND SUPPORT

  • Safe and convenient service via ground level or platform access to daily service points.
  • Swing-out doors on both sides of engine compartment provide easy access to daily service checks.
  • Ecology drains for ease of service and prevention of spills.
  • Reduce downtime with VIMS™ system notifications so operators and technicians can resolve problems before failure.
  • Sight gauges mean quick visual inspection and minimize fluid contamination.
  • Hydraulic oil cooler, air conditioner condenser, and fuel cooler grouped for easy access.
  • Side access doors allow convenient cleanout of cooling package.
  • New ground level service area includes a Master Disconnect Switch with integrated lock-out/tag-out, DEF purge lamp (Tier 4 Final/Stage IV machines only), circuit breakers, emergency fuel shutoff switch and the jump start receptacle.
  • Centralized grease points speed maintenance.
  • Cat dealers keep you running with preventive maintenance programs, maintenance contracts, best-in-class parts availability and operator training support.

Standard Equipment:

Optional Equipment:

    Operator Environment
    • Radio, AM/FM/AUX/USB/BLUETOOTH
    Fluids
    • Antifreeze, –50° C (–58° F)
    Special Arrangements
    • Engine: – Sound suppression
    Starting Aids
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
    Miscellaneous
    • Film (ANSI) (Tier 4 Final/Stage IV only)
    • EU certification (Tier 4 Final/Stage IV only)
    • Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)