MP324 Pulverizer Jaw

MP324 Pulverizer Jaw

Cat® Multi-Processors accept multiple interchangeable jaws for a wide range of demolition tasks. Faster cycle times get your jobs done quicker. Greater power means taking on bigger jobs. ...
PDF Print SHARE

Performance

Cycle Time - Open
1.9s
Cycle Time - Open
0.019
Cycle Time - Close
1.3s
Cycle Time - Close
0.013
Crushing Force - Tooth Tip
162Sh Ton
Crushing Force - Tooth Tip
1.62
Crushing Force - Cutter Tip
221Sh Ton
Crushing Force - Cutter Tip
2.21
Crushing Force - Primary Cutter
556Sh Ton
Crushing Force - Primary Cutter
5.56

Recommended Carrier Weight

Excavator Minimum
32 tons
Excavator Maximum
50 tons

Hydraulic Requirements

Jaw Circuit - Max. Oil Pressure
5076psi
Jaw Circuit - Max. Oil Pressure
280
Jaw Circuit - Max. Oil Pressure
Jaw Circuit - Max. Oil Flow
74l/min
Jaw Circuit - Max. Oil Flow
160
Rotation Circuit - Max. Oil Pressure
2321psi
Rotation Circuit - Max. Oil Pressure
0.5
Rotation Circuit - Max. Oil Flow
11gal/min
Rotation Circuit - Max. Oil Flow

Dimensions - Jaw

Jaw Depth
33in
Jaw Depth
33
Cutter Length
8in
Cutter Length
8
Jaw Opening - Maximum
32in
Jaw Opening - Maximum
32
Jaw Width - Fixed
20in
Jaw Width - Fixed
20
Jaw Width - Moveable
12in
Jaw Width - Moveable
12

Dimensions - Housing + Jaw

Length
90in
Length
90
Height
74in
Height
74
Width
40in
Width
40

Weight

Weight - Housing, Jaw and Bracket
7416lb
Weight - Housing, Jaw and Bracket
74.16
Weight - Jaw Only
3715lb
Weight - Jaw Only
37.15

Cycle Times are 50 Percent Faster

  • New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
  • You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
  • Maximum crushing/cutting force is applied as soon as the jaw contacts material.

Up to 19 Percent More Force

  • Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
  • Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
  • Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.

Change Jaws in 15 Minutes

  • Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
  • Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
  • MP332 accepts these jaw types:
    • Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
    • Demolition – opens wide to crack the largest concrete structures
    • Pulverizer – crushes concrete, separating the rebar
    • Shear – cuts structural steel, pipe, and cable
    • Tank Shear – cuts at right angle on three sides, cleanly cutting tanks or plate steel
    • Universal – innovative design cuts steel and crushes concrete

Durable and Maintainable

  • Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
  • Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
  • Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.

Standard Equipment: